JVC RX-F10S manual Connecting video components, Turn off all components before making connections

Page 9

Connecting video components

Do not connect the AC power plug to the wall outlet until all connections are completed.

This receiver is equipped with the following video terminals— composite video, S-video, and component video terminals.

If your video components have S-video (Y/C-separation) and/or component video (Y, PB, PR) jacks, connect them using an S- video cable (not supplied) or component video cable (not supplied). By using these terminals, you can get a better picture quality in the order:

Component > S-video > Composite

IMPORTANT:

The video signals from one type of these input jacks are transmitted only through the video output jacks of the same type. Therefore, if a recording video component and a playing video component are connected to the receiver through the video terminals of different type, you cannot record the picture. In addition, if the TV and a playing video component are connected to the receiver through the video terminals of different type, you cannot view the playback picture on the TV.

Turn off all components before making connections.

When you connect other components, refer also to their manuals.

DO NOT use a TV through a VCR or a TV with a built-in VCR; otherwise, the picture may be distorted.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

If your video components have AV COMPU LINK terminal

See also page 32 for detailed information about the connection

and the AV COMPU LINK remote control system.

started

7Connecting a DVD recorder or DVD player with its stereo output jacks:

Red

Getting

AUDIO

L

R

DVR DVR/DVD

OUT (REC) IN (PLAY)

White

Stereo audio cable (not supplied)

White

Red

OUT VCR (REC)

Å

 

ı

 

DVD recorder or

 

 

DVD player

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ç Î ‰ Ï Ì

Y

PB

PR

VIDEO

Composite video cable

 

 

 

MONITOR

 

 

 

(not supplied)

OUT

 

 

 

DVR/DVD

IN

VCR

DVR

DVR/DVD

OUT VCR

IN

OUT (REC)

IN (PLAY)

(REC)

COMPONENT VIDEO

 

 

 

S-video cable (not supplied)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Green

 

Blue

 

Red

 

 

Component video cable (not supplied)

NOTE

When connecting a DVD recorder or DVD player to the component video input jacks, make the component video input setting (DVD VIDEO) correctly for AV COMPU LINK remote control system. See page 21 for details.

ÅTo left/right audio channel output

ıOnly for DVD recorder: To left/right audio channel input

ÇOnly for DVD recorder: To composite video input Î To composite video output

To S-video output

Ï Only for DVD recorder: To S-video input

Ì To component video output

Connect Y, PB, and PR correctly.

7

Image 9
Contents For Customer Use RX-F10SFor Canada/pour Le Canada For Canada/pour le CanadaFor U.S.A Table of Contents Parts identification Remote controlFront panel Display windowRear panel Putting batteries in the remote control Before InstallationChecking the supplied accessories Getting startedConnecting the FM and AM antennas AM antenna connectionFM antenna connection Speaker Layout Diagram Connecting the speakersConnecting the speakers Connecting the powered subwooferTurn off all components before making connections Connecting video componentsNot supplied Only for DVD recorder To S-video inputAbout DVD Multi Green Blue RedWhite Connecting a TV Connecting a DBS tunerDigital connection Connecting the power cordDigital input terminals Digital output terminalTo turn off the power into standby Turn on the powerSelecting the analog or digital input mode Basic operationsAdjust the volume Selecting the digital decode modeListening with headphones Activating TV Direct Adjusting the subwoofer audio positionPress TV Direct AUDIO/TV/VCR/DBSBasic adjustment of auto memory Turning off the power with the Sleep TimerSignal and speaker indicators on the display Turning off the sounds temporarilyBasic settings From the remote control onlyTake your position where you listen to Sound Basic setting items Operating procedure Setting the speakersSetting subwoofer information-SUBWOOFER Setting the speaker distance Setting bass soundSetting subwoofer output-SUBWFR OUT Setting the crossover frequency-CROSS OverSelecting the main or sub channel Using the Midnight modeAuto Sroff Auto SR onVCR S/C VCR CompntBasic adjustment items Sound adjustmentsPress Adjust Turn Multi JOG to adjust the selected itemAdjusting speaker output level Adjusting the effect level for DSP modes-EFFECTAdjusting the center tone-CENTER Tone Attenuating the input signal-INPUT ATT Adjusting the bass soundsSelecting the subwoofer sound phase-SBWFR Reinforcing the bass-BASS BoostUsing preset tuning Tuning in to stations manuallyTo store the preset stations Tuner operationsTo tune in a preset station Selecting the FM reception modeFrom the remote control Press FM/AM to select the band Press Tuner PresetReproducing theater ambience Creating realistic sound fieldsIntroducing the Surround modes Dolby Digital3D Headphone mode About other digital signalsDTS All Channel Stereo mode ALL CH ST Introducing the DSP modesDigital Acoustic Processor DAP modes Virtual Surround Back Using the Surround/DSP modesTo cancel Surround/DSP modes Turn Multi JOG to select the Surround/DSP mode you wantSelect and play any source other than DVD Multi Press SurroundConnections 1 AV Compu Link connection AV Compu Link remote control systemConnections 2 Video cable connection CaseAutomatic selection of TV’s input mode Connecting procedureAutomatic power on/off One-touch video playVCR Operating other JVC productsChannel + REC PauseDVR/DVD DVD recorder or DVD playerTOP MENU/MENU ZoomOperating other manufacturers’ products Changing the transmittable signals for operating a TVRelease TV Try to operate your TV by pressing TVRelease VCR Changing the transmittable signals for operating a VCRTry to operate your VCR by pressing VCR Manufacturers’ codes for VCRManufacturers’ codes for Catv converter Release DBSManufacturers’ codes for DBS tuner Release DVR/DVDProblem Possible Cause Solution TroubleshootingAmplifier SpecificationsFM tuner IHF AM tunerLimited Warranty Authorized Service Centers RX-F10S Home Theater Receiver Recepteur Pour Cinema Maison Mises en garde, précautions et indications diverses English Parts identification Front panel Getting started Connecting the FM and AM antennas Connecting the speakers Connecting video components Green Blue Red White Red DBS tuner Composite video cable not supplied You can connect any digital componens which have an optical Basic operations Adjust the volume Position Adjusting the subwoofer audioTurning off the sounds temporarily Basic settings Basic setting items 12 cm Setting the crossover frequency-CROSS Over Dual Mono Setting Auto Surround-AUTO Surrnd Sound adjustments Adjusting the sound parameters for Adjusting the effect level for DSP modes-EFFECTSurround/DSP modes Adjusting the bass sounds From the remote control only Press the numeric buttons 1 10, +10 to Pro Logic II Movie Plii Movie and Pro Logic II Music Plii Plii MoviePlii Music English Introducing the DSP modes SML/LRG AUTO/ON EX/ES settingActivating the Surround/DSP modes AV Compu Link remote control system Connecting procedure Operating other JVC products Return CancelDVD/CARD DimmerOperating other Manufacturers’Products English Release DBS Troubleshooting Power Requirements AC 120 V , 60 Hz Power Consumption EN, FR Victor Company of JAPAN, Limited 0404MWMMDWJEIN

RX-F10S specifications

The JVC RX-F10S is an impressive home theater receiver that embodies a blend of power, versatility, and advanced technology. Designed to enhance the audio-visual experience, this receiver offers a suite of features that cater to both casual listeners and audiophiles alike.

At the heart of the RX-F10S is its robust amplification system, delivering a powerful output that ensures high-quality sound reproduction across a wide range of frequencies. With multiple channels for surround sound support, it allows users to create an immersive audio environment, perfect for movie-watching or music enjoyment. The receiver supports various surround sound formats, such as Dolby Digital and DTS, enabling a cinematic experience right in the comfort of one's living room.

One of the standout features of the RX-F10S is its connectivity options. It is equipped with multiple HDMI inputs that support the latest 4K Ultra HD and HDR pass-through. This ensures compatibility with the latest gaming consoles, Blu-ray players, and streaming devices, providing future-proofing for your entertainment setup. In addition to HDMI, the receiver also includes optical and coaxial digital inputs, along with several analog inputs, providing flexibility in connecting various audio sources.

The RX-F10S is designed with user convenience in mind. Its intuitive on-screen interface simplifies the setup process and allows users to easily navigate through settings and options. The inclusion of a remote control further enhances usability, making it easy to switch between audio sources and adjust sound settings without getting up.

Another notable aspect of the JVC RX-F10S is its compatibility with wireless technologies. It features built-in Bluetooth that allows for seamless streaming from smartphones, tablets, and other compatible devices. This adds an extra layer of convenience, enabling users to enjoy their favorite music without the hassle of physical connections.

In terms of sound customization, the RX-F10S includes an equalizer that allows listeners to adjust their audio preferences according to their taste or the acoustics of their room. This level of personalization is crucial for those who seek a tailored listening experience.

Overall, the JVC RX-F10S is a versatile home theater receiver that combines powerful performance with a wide array of connectivity options and advanced features. Its ability to deliver high-quality sound while being user-friendly makes it an excellent choice for anyone looking to upgrade their home entertainment setup. Whether you are watching movies, playing games, or listening to music, the RX-F10S is poised to elevate your audio experience to new heights.