JVC RX-F10S manual Basic setting items

Page 64

In the following cases, set the speakers manually.

When the receiver detects the sound but as “SILENT” twice in succession.

The setting is made. (The distance of the speakers from which sound has not been detected is set to “+9.0m (+30ft).”)

The receiver exits from Smart Surround Setup.

When the receiver fails to detect the sound three times.

“MANUAL” appears on the display. The receiver exits from Smart Surround Setup.

To cancel Smart Surround Setup, press SMART SURROUND SETUP while “SETTING UP” flashes on the display.

No other operations can be accepted after “SETTING UP” stops flashing. Complete the Smart Surround Setup.

To check the setting made by Smart Surround Setup, press SMART SURROUND SETUP while the receiver is in normal operation mode.

The setting values appear one after another (see page 16).

If you have changed speaker distance and/or output level manually after using Smart Surround Setup, “MANUAL” appears.

If you have not used Smart Surround Setup, “NO S.S.S.” appears.

NOTES

The speaker distance and output level manually set will be applied instead of those set by using Smart Surround Setup in the following cases:

When you change one of the speaker distance (see page 19).

When you change one of the speaker output level (see page 23).

When you change one of the speaker size either from “NO” to “SML” or “LRG,” or from “SML” or ”LRG” to “NO” (see page 18).

When you want to adjust the speaker distance and output level manually, see pages 19 and 23.

Do not clap your hands so hard that it may hurt your hands.

Basic setting items

You can adjust the following items. See pages in parentheses for details.

You cannot select the items which is not available with the current setting.

Items

To do

SUBWOOFER

Register your subwoofer. (18)

 

 

FRONT SPK

Register your front speaker size. (18)

 

 

CENTER SPK

Register your center speaker size. (18)

 

 

SURRND SPK

Register your surround speaker size. (18)

 

 

S BACK SPK

Register your surround back speaker size.

 

(18)

 

 

DIST UNIT

Select the measuring unit for the speaker

 

distance. (19)

 

 

FRNT L DIST*

Register the distance from the left front

 

speaker to your listening point. (19)

 

 

FRNT R DIST*

Register the distance from the right front

 

speaker to your listening point. (19)

 

 

CENTER DIST*

Register the distance from the center speaker

 

to your listening point. (19)

 

 

SURR L DIST*

Register the distance from the left surround

 

speaker to your listening point. (19)

 

 

SURR R DIST*

Register the distance from the right surround

 

speaker to your listening point. (19)

 

 

S BACK DIST*

Register the distance from the surround back

 

speaker to your listening point. (19)

 

 

SUBWFR OUT

Select sounds emitted from the subwoofer.

 

(19)

 

 

EX/ES

Select the EX/ES reproduction mode. (20)

 

 

DUAL MONO

Select the Dual Mono sound channel. (20)

 

 

CROSS OVER

Select the cutoff frequency to the subwoofer.

 

(19)

 

 

LFE ATT

Attenuate the bass (LFE) sounds. (19)

 

 

MIDNIGHT M.

Reproduce a powerful sound at night. (20)

 

 

DIGITAL IN1

Select the component connected to the digital

 

coaxial terminal—1(DVR/DVD). (21)

 

 

DIGITAL IN2

Select the component connected to the digital

 

optical terminal—2(DBS). (21)

 

 

DIGITAL IN3

Select the component connected to the digital

 

optical terminal—3(VCR). (21)

 

 

AUTO SURRND

Select Auto Surround mode. (21)

 

 

DVD VIDEO

Select the type of video terminal used for the

 

DVD recorder or DVD player. (21)

 

 

VCR VIDEO

Select the type of video terminal used for the

 

VCR. (21)

 

 

*If you have used Smart Surround Setup on page 16, these settings are not required.

English

Basic settings

CONTINUED ON THE NEXT PAGE

17

Image 64
Contents RX-F10S For Customer UseFor Canada/pour le Canada For Canada/pour Le CanadaFor U.S.A Table of Contents Remote control Parts identificationDisplay window Front panelRear panel Before Installation Putting batteries in the remote controlChecking the supplied accessories Getting startedAM antenna connection Connecting the FM and AM antennasFM antenna connection Connecting the speakers Speaker Layout DiagramConnecting the speakers Connecting the powered subwooferConnecting video components Turn off all components before making connectionsNot supplied Only for DVD recorder To S-video inputGreen Blue Red About DVD MultiWhite Connecting a DBS tuner Connecting a TVConnecting the power cord Digital connectionDigital input terminals Digital output terminalTurn on the power To turn off the power into standbySelecting the analog or digital input mode Basic operationsSelecting the digital decode mode Adjust the volumeListening with headphones Adjusting the subwoofer audio position Activating TV DirectPress TV Direct AUDIO/TV/VCR/DBSTurning off the power with the Sleep Timer Basic adjustment of auto memorySignal and speaker indicators on the display Turning off the sounds temporarilyFrom the remote control only Basic settingsTake your position where you listen to Sound Basic setting items Setting the speakers Operating procedureSetting subwoofer information-SUBWOOFER Setting bass sound Setting the speaker distanceSetting subwoofer output-SUBWFR OUT Setting the crossover frequency-CROSS OverUsing the Midnight mode Selecting the main or sub channelAuto SR on Auto SroffVCR S/C VCR CompntSound adjustments Basic adjustment itemsPress Adjust Turn Multi JOG to adjust the selected itemAdjusting the effect level for DSP modes-EFFECT Adjusting speaker output levelAdjusting the center tone-CENTER Tone Adjusting the bass sounds Attenuating the input signal-INPUT ATTSelecting the subwoofer sound phase-SBWFR Reinforcing the bass-BASS BoostTuning in to stations manually Using preset tuningTo store the preset stations Tuner operationsSelecting the FM reception mode To tune in a preset stationFrom the remote control Press FM/AM to select the band Press Tuner PresetCreating realistic sound fields Reproducing theater ambienceIntroducing the Surround modes Dolby DigitalAbout other digital signals 3D Headphone modeDTS Introducing the DSP modes All Channel Stereo mode ALL CH STDigital Acoustic Processor DAP modes Using the Surround/DSP modes Virtual Surround BackTurn Multi JOG to select the Surround/DSP mode you want To cancel Surround/DSP modesSelect and play any source other than DVD Multi Press SurroundAV Compu Link remote control system Connections 1 AV Compu Link connectionConnections 2 Video cable connection CaseConnecting procedure Automatic selection of TV’s input modeAutomatic power on/off One-touch video playOperating other JVC products VCRChannel + REC PauseDVD recorder or DVD player DVR/DVDTOP MENU/MENU ZoomChanging the transmittable signals for operating a TV Operating other manufacturers’ productsRelease TV Try to operate your TV by pressing TVChanging the transmittable signals for operating a VCR Release VCRTry to operate your VCR by pressing VCR Manufacturers’ codes for VCRRelease DBS Manufacturers’ codes for Catv converterManufacturers’ codes for DBS tuner Release DVR/DVDTroubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM tunerLimited Warranty Authorized Service Centers RX-F10S Home Theater Receiver Recepteur Pour Cinema Maison Mises en garde, précautions et indications diverses English Parts identification Front panel Getting started Connecting the FM and AM antennas Connecting the speakers Connecting video components Green Blue Red White Red DBS tuner Composite video cable not supplied You can connect any digital componens which have an optical Basic operations Adjust the volume Adjusting the subwoofer audio PositionTurning off the sounds temporarily Basic settings Basic setting items 12 cm Setting the crossover frequency-CROSS Over Dual Mono Setting Auto Surround-AUTO Surrnd Sound adjustments Adjusting the effect level for DSP modes-EFFECT Adjusting the sound parameters forSurround/DSP modes Adjusting the bass sounds From the remote control only Press the numeric buttons 1 10, +10 to Plii Movie Pro Logic II Movie Plii Movie and Pro Logic II Music PliiPlii Music English Introducing the DSP modes EX/ES setting SML/LRG AUTO/ONActivating the Surround/DSP modes AV Compu Link remote control system Connecting procedure Operating other JVC products Cancel ReturnDVD/CARD DimmerManufacturers’ Operating otherProducts English Release DBS Troubleshooting Power Requirements AC 120 V , 60 Hz Power Consumption EN, FR Victor Company of JAPAN, Limited 0404MWMMDWJEIN

RX-F10S specifications

The JVC RX-F10S is an impressive home theater receiver that embodies a blend of power, versatility, and advanced technology. Designed to enhance the audio-visual experience, this receiver offers a suite of features that cater to both casual listeners and audiophiles alike.

At the heart of the RX-F10S is its robust amplification system, delivering a powerful output that ensures high-quality sound reproduction across a wide range of frequencies. With multiple channels for surround sound support, it allows users to create an immersive audio environment, perfect for movie-watching or music enjoyment. The receiver supports various surround sound formats, such as Dolby Digital and DTS, enabling a cinematic experience right in the comfort of one's living room.

One of the standout features of the RX-F10S is its connectivity options. It is equipped with multiple HDMI inputs that support the latest 4K Ultra HD and HDR pass-through. This ensures compatibility with the latest gaming consoles, Blu-ray players, and streaming devices, providing future-proofing for your entertainment setup. In addition to HDMI, the receiver also includes optical and coaxial digital inputs, along with several analog inputs, providing flexibility in connecting various audio sources.

The RX-F10S is designed with user convenience in mind. Its intuitive on-screen interface simplifies the setup process and allows users to easily navigate through settings and options. The inclusion of a remote control further enhances usability, making it easy to switch between audio sources and adjust sound settings without getting up.

Another notable aspect of the JVC RX-F10S is its compatibility with wireless technologies. It features built-in Bluetooth that allows for seamless streaming from smartphones, tablets, and other compatible devices. This adds an extra layer of convenience, enabling users to enjoy their favorite music without the hassle of physical connections.

In terms of sound customization, the RX-F10S includes an equalizer that allows listeners to adjust their audio preferences according to their taste or the acoustics of their room. This level of personalization is crucial for those who seek a tailored listening experience.

Overall, the JVC RX-F10S is a versatile home theater receiver that combines powerful performance with a wide array of connectivity options and advanced features. Its ability to deliver high-quality sound while being user-friendly makes it an excellent choice for anyone looking to upgrade their home entertainment setup. Whether you are watching movies, playing games, or listening to music, the RX-F10S is poised to elevate your audio experience to new heights.