JVC RX-F10S manual Release DBS, Manufacturers’ codes for Catv converter, Release DVR/DVD

Operating other manufacturers’ products

❏Changing the transmittable signals for operating a CATV converter or DBS tuner

Set the mode selector to “AUDIO/TV/VCR/DBS.”

1Press and hold DBS .

2Press DBS.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

See “Manufacturers’ codes for CATV converter” or “Manufacturers’ codes for DBS tuner” below.

4Release DBS .

Now, you can perform the following operation on the CATV converter or DBS tuner.

DBS :	Turn on or off the CATV converter or
	DBS tuner.

After pressing DBS, you can perform the following operations on the CATV converter or DBS tuner.

CHANNEL +/–:Change the channel numbers on the CATV converter or DBS tuner.

1 – 9, 0:Select the channel numbers on the CATV converter or DBS tuner.

See the instructions supplied with the CATV converter or DBS tuner for details.

5Try to operate your CATV converter or DBS tuner by pressing DBS .

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If more than one code is listed for your brand of CATV

converter or DBS tuner, try each one until the correct one is entered.

Manufacturers’ codes for CATV converter

Manufacturer	Codes
G.I.	01
Gemini	02
Hamlin	03, 04, 05, 06
Jerrold	07, 08, 09, 10, 11, 12, 13, 14, 15
Macom	16, 17, 18
Magnavox	19
Oak	20, 21, 22
Panasonic	23, 24
Philips	25, 26, 27, 28, 29, 30
Pioneer	31, 32
S. Atlanta	33, 34, 35
Samsung	36
Tocom	37
Zenith	38, 39

Manufacturers’ codes for DBS tuner

Manufacturer	Codes
Echostar	40
G.I.	41
Hitachi	42
Hughes	43
Panasonic	44
Primestar	45
RCA	46
Sony	47
Toshiba	48

Initial setting: 01

❏Changing the transmittable signals for operating a DVD player

Set the mode selector to “DVD.”

1Press and hold DVR/DVD .

2Press DVR/DVD.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

See “Manufacturers’ codes for DVD player” below.

4Release DVR/DVD .

Now, you can perform the following operation on the DVD player.

DVR/DVD :	Turn on or off the DVD player.
3:	Start playback.
1:	Retun to the beginning of the current
	chapter (or fast-forward for some models).
¡:	Skip to the beginning of the next chapter
	(or fast-reverse for some models).
7:	Stop playback.
8:	Pause playback.
MENU:	Display the menu recorded on DVD
	VIDEO discs.
5/∞/3/2:	Select an item on the menu screen.
ENTER:	Enter the selected item.
1 – 9, 0:	Select the chapter number.

See the instructions supplied with the DVD player for details.

5Try to operate your DVD player by pressing DVR/DVD .

When your DVD player turns on or off, you have entered the

correct code.

If more than one code is listed for your brand of DVD player,

try each one until the correct one is entered.

Manufacturers’ codes for DVD player

Manufacturer	Codes
JVC	01
Hitachi	12
Kenwood	05, 08
Mitsubishi	10
Onkyo	15, 16
Panasonic	04
Philips	07
Pioneer	03
Samsung	14
Sony	02
Toshiba	06
Yamaha	09

Initial setting: 01

NOTE

You cannot use this remote control to operate other manufacturers’ DVD recorder.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

38