JVC RX-F10S manual Sound adjustments, Basic adjustment items, On the front panel, Press Adjust

Sound adjustments

You can make sound adjustment to your preference after completing basic setting.

Basic adjustment items

You can adjust the following items. See pages in parentheses for details.

•You cannot select the items which is not available with the current setting.

Items	To do
SUBWFR LVL	Adjust the subwoofer output level. (23)
FRONT L LVL*	Adjust the left front speaker output level.
	(23)
FRONT R LVL*	Adjust the right front speaker output level.

Operating procedure

1 3, 5 2, 4

On the front panel:

Before you start, remember...

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Ex.: When adjusting subwoofer output level.

1Press ADJUST.

MULTI JOG now works for the sound adjustment.

2Turn MULTI JOG until the item you want to adjust appears on the display.

•As you turn MULTI JOG, the adjustment items change as follows:

EQ C.TONE		VIRTUAL SB AUDIO P. BASS			TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
LPCM	L	C	R	PL	ATT
DOLBY D	S . WFR LFE			NEO : 6	HP
DTS AAC				DSP 3D	MHz
	LS	SB	RS
96 / 24				AUTO SR	kHz

Sound adjustments

	(23)
CENTER LVL*	Adjust the center speaker output level. (23)
SURR L LVL*	Adjust the left surround speaker output level.
	(23)
SURR R LVL*	Adjust the right surround speaker output
	level. (23)
S BACK LVL*	Adjust the surround back speaker output
	level. (23)
EFFECT	Adjust the effect level. (23)
PANORAMA	Add “wraparound” sound effect with side-

SUBWFR LVL FRONT R LVL SURR L LVL S BACK LVL PANORAMA INPUT ATT D EQ 63Hz D EQ 1kHz D EQ 16kHz

SBWFR PHASE

FRONT L LVL CENTER LVL SURR R LVL EFFECT BASS BOOST CENTER TONE D EQ 250Hz D EQ 4kHz

CENTER GAIN

(Back to the beginning)

	wall image. (23)
BASS BOOST	Boost the bass level. (24)
INPUT ATT	Attenuate the input level of analog source.
	(24)
CENTER TONE	Make the center tone soft or sharp. (23)
D EQ 63Hz	Adjust the equalization pattern of each
D EQ 250Hz	band. (24)
D EQ 1kHz
D EQ 4kHz
D EQ 16kHz
CENTER GAIN	Adjust the sound localization of the center
	channel. (24)
SBWFR PHASE	Select the subwoofer sound phase. (24)

*If you have used Smart Surround Setup on page 16, these settings are not required.

You can also use the remote control for sound adjustment except for the following items:

“PANORAMA,” “INPUT ATT,” “CENTER GAIN,” and “SBWFR PHASE.”

3Press SET.

The current setting for the selected item appears.

EQ C.TONE		VIRTUAL SB AUDIO P. BASS			TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
LPCM	L	C	R	PL	ATT
DOLBY D	S . WFR LFE			NEO : 6	HP
DTS AAC				DSP 3D	MHz
	LS	SB	RS
96 / 24				AUTO SR	kHz

4Turn MULTI JOG to adjust the selected item.

EQ C.TONE		VIRTUAL SB AUDIO P. BASS			TA NEWS INFO RDS TUNED ST AUTO MUTING SLEEP AUTO MODE
LPCM	L	C	R	PL	ATT
DOLBY D	S . WFR LFE			NEO : 6	HP
DTS AAC				DSP 3D	MHz
	LS	SB	RS
96 / 24				AUTO SR	kHz

–10 0 +10

Your adjustment is stored.

5Press SET.

6Repeat steps 2 to 5 to adjust other items if necessary.

22