ProForm PFES80040 user manual Repeat this step with the Left Pedal Leg

11.Attach the Leg Lever Bracket (14) to the Seat Base (2) with two M8 x 40mm Button Screws (142) and two M8 Split Washers (140).

12.Grease an M10 x 75mm Button Bolt (129). Attach the Leg Lever (4) to the Leg Lever Bracket (14) with the Bolt and an M10 Nylon Locknut (81). Do not overtighten the Locknut; the Leg Lever must be able to pivot easily.

13.Attach the Right Pedal (28) to the Right Pedal Leg (8) with two M8 x 51mm Button Screws (98), two M8 Split Washers (140), and two M8 Washers (139).

Repeat this step with the Left Pedal (27) and the Left Pedal Leg (7).

14.Slide a Plastic Spacer (180) onto the right Crank Shaft (68). Orient the Right Pedal Leg (8) as shown. Attach the Right Pedal Leg to the Crank Shaft with an M8 x 19mm Button Screw (94) and an M8 Large Zinc Washer (74).

Repeat this step with the Left Pedal Leg (7).

11
		142
		140
		140
		2
14
12		14
129
4		81
13
		27
7
		28
		8	140
			139
		140	98
14
		7
		8
68	180	74
		94

9