Brother BAS-761 instruction manual Switch box panel buttones, @0 Start button, @1 Reset button

Page 23

6. Button functions

6-2. Switch box panel buttones

!9

@0

@1

@2

!9 FOLDER RESET button (carries out positioning when the power is turned on)

This button is used to stop the folder while folding is in progress and to reset he folding condition.

When the button is pressed once, folding is stopped, and when it is pressed twice, the folder is reset, and the workpiece and the pocket can then be set.

@0 START button

This button is used to resume sewing after an emergency stop has occurred during sewing or after an upper thread breakage has occurred. It should be pressed after the RESET button has been pressed.

In addition, if an error has occurred, this button is used to continue operation after the cause of the error has been eliminated.

@1 RESET button

This button is used to trim the thread after an emergency stop has occurred during sewing or after an upper thread breakage has occurred.

In addition, if an error has occurred, this button is used to clear the error status after the cause of the error has been eliminated.

@2 EMERGENCY STOP button

This button is used to stop all operations.

BAS-761

16

Image 23

Contents BAS-761 Safety Instructions Environmental requirements Installation Cleaning Thread take-up cover Belt cover Guard bar Contents Names of Machine Components Names of Machine ComponentsSpecifications Installation of the machine table InstallationRemoval of the fixing bolts from the machine Installation of the spool standPositioning of the front supporter Connection of the foot-switch connectorConnection of the air hose Installation positions for operation box and switch box Before installation Installation of the folding group assemblyLubrication X2.4 rotary hook Installing the needleCorrect operation Upper threadingX2.4 rotary hook X1.7 rotary hook Bobbin case threadingRemoval of the bobbin case Removal of the bobbinBobbin thread winding Thread take-up spring X2.4 rotary hook X1.7 rotary hook Thread tensionOperation box panel buttones Button functionsCounter button Thread Monitor button Thread Monitor indicatorTest button Test indicator Button functions Sewing Speed buttonArrow keys Cancel buttonButton functions Bobbin Change button Enter button@2 Emergency Stop button Switch box panel buttones@1 Reset button @0 Start buttonRestart buttones Foot switchSettings before sewing Settings before sewingSetting the folder mode Setting the sewing speed and the bar tacking speedTack Speed 3000 rpm Replacing the lower thread Setting the lower thread counterSetting the stacker roller feed amount Setting the piece counterChange date DATE1998/10/1 Screen Change time Time Setting the date and timePreparation for sewing Preparation for sewingRead sewing data Sewing Sewing with the folder in automatic modeSewing with the folder in pattern matching mode Sewing with the folder in label attachment mode Sewing with the folder in step mode Test feeding To interrupt sewing and return to the standby position Emergency stopTo stop the machine during sewing To continue sewingNeedle-bar height adjustment AdjustmentsNeedle and rotary hook timing Presser foot height adjustmentRemoval of the movable knife Removal of the fixed knife and the movable knifeRemoval of the fixed knife Stacker position adjustment Sewing clamp assembly number Sewing clamp assembly number selectionFunctions of operation panel DIP switches Using the DIP switchesUsing the DIP switches DIP switch positionsUsing the DIP switches Table of error code Error code Contents Reset Emergency Stop button pressed 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone