Brother BAS-761 instruction manual Tack Speed 3000 rpm

Page 26

7. Settings before sewing

Change tack speed.	*	If the SEWING SPEED button u is pressed once
Change tack speed.		more, the sewing speed will not be changed, and
		more, the sewing speed will not be changed, and
		screen 2-2 for changing the bar tacking speed will be
TACK SPEED 3000 rpm		displayed.

Screen 2-2

Change sewing speed.

SEWING SPEED 4000 rpm

Screen 2-1

3.Press the ENTER button !6. The sewing speed will be changed to the new setting, and screen 2-2 for chang- ing the bar tacking speed will be displayed.

4.Press the arrow keys !8to select the desired bar tack- ing speed.

The bar tacking speed can be set in 7 steps from 500 to 3,500 rpm.

*If the CANCEL button !5or SEWING SPEED button u is pressed, the bar tacking speed will not be changed and the screen will return to the original display.

5.Press the ENTER button !6.

The bar tacking speed will be changed to the new set- ting, and the screen will return to the initial display.

¡The maximum number of stitches is limited by the sewing pitch in the sewing data as shown in the table below.

Pitch	Max. sewing speed
– 3.5mm	4250rpm
3.55 – 4.5mm	3500rpm
4.55 – 5.0mm	3000rpm
5.05 – 6.0mm	2500rpm

19

BAS-761

Image 26

Contents BAS-761 Safety Instructions Environmental requirements Installation Cleaning Thread take-up cover Belt cover Guard bar Contents Names of Machine Components Names of Machine ComponentsSpecifications Installation Installation of the machine tableInstallation of the spool stand Removal of the fixing bolts from the machinePositioning of the front supporter Connection of the foot-switch connectorConnection of the air hose Installation positions for operation box and switch box Installation of the folding group assembly Before installationLubrication Upper threading Installing the needleCorrect operation X2.4 rotary hookRemoval of the bobbin Bobbin case threadingRemoval of the bobbin case X2.4 rotary hook X1.7 rotary hookBobbin thread winding Thread tension Thread take-up spring X2.4 rotary hook X1.7 rotary hookButton functions Operation box panel buttonesButton functions Sewing Speed button Thread Monitor button Thread Monitor indicatorTest button Test indicator Counter buttonEnter button Cancel buttonButton functions Bobbin Change button Arrow keys@0 Start button Switch box panel buttones@1 Reset button @2 Emergency Stop buttonFoot switch Restart buttonesSetting the sewing speed and the bar tacking speed Settings before sewingSetting the folder mode Settings before sewingTack Speed 3000 rpm Setting the lower thread counter Replacing the lower threadSetting the piece counter Setting the stacker roller feed amountSetting the date and time Change date DATE1998/10/1 Screen Change time TimePreparation for sewing Preparation for sewingRead sewing data Sewing with the folder in automatic mode SewingSewing with the folder in pattern matching mode Sewing with the folder in label attachment mode Sewing with the folder in step mode Test feeding To continue sewing Emergency stopTo stop the machine during sewing To interrupt sewing and return to the standby positionAdjustments Needle-bar height adjustmentPresser foot height adjustment Needle and rotary hook timingRemoval of the movable knife Removal of the fixed knife and the movable knifeRemoval of the fixed knife Stacker position adjustment Sewing clamp assembly number selection Sewing clamp assembly numberDIP switch positions Using the DIP switchesUsing the DIP switches Functions of operation panel DIP switchesUsing the DIP switches Table of error code Error code Contents Reset Emergency Stop button pressed 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone