Brother BAS-761 instruction manual Table of error code

12. Table of error code

12. Table of error code

¡If an error occurs which cannot be reset, turn off the power momentarily and eliminate the cause of the problem.

¡If an error occurs which can be reset, eliminate the cause of the problem and then press the RESET button.

Error code	Contents	Reset
E – 500	Abnormal rise in 24 V power supply voltage (exceeds +20% of rating)	No
E – 501	Abnormal drop in 24 V power supply voltage (exceeds -20% of rating)	No
E – 502	Abnormal rise in 36 V power supply voltage (exceeds +20% of rating)	No
E – 503	Abnormal drop in 36 V power supply voltage (exceeds -20% of rating)	No
E – 504	Abnormal rise in primary voltage (exceeds +20% of rating)	No
E – 505	Abnormal drop in primary voltage (exceeds -20% of rating)	No
E – 510	Needle bar is not at its highest position at the start of positioning.	Yes
E – 511	Needle bar is not at its highest position at the start of sewing.	Yes
E – 512	Needle bar is not at its highest position during test feeding.	Yes
E – 513	Needle bar is not at its highest position during programming.	Yes
E – 520	Upper thread breakage error	Yes
E – 530	Model and sewing program number do not match.	Yes
E – 535	Retractable are for double (0 to 31) but data does not contain a double switching	Yes
	command.
E – 536	Model numbers are for single (32 to 63) but data does not contain a single	Yes
	switching command.
E – 540	Machine head synchronization sensor error or machine head motor error	Yes
E – 550	Needle up stop error	No
E – 560	Presser foot cylinder malfunction or sensor malfunction	No
E – 570	Double sensor error	No
E – 580	Needle racking cylinder malfunction or sensor malfunction	No
E – 600	Machine started with no sewing data	No
E – 700	Error occurred when reading from floppy disk	Yes
E – 701	Error occurred when writing to floppy disk	Yes
E – 710	No sewing data for number specified	Yes
E – 711	Data writing carried out with no sewing data	Yes
E – 720	No disk in floppy disk drive	Yes
E – 730	Floppy disk is write-protected	Yes
E – 740	Insufficient free space on floppy disk	Yes
E – 750	Floppy disk cannot be formatted.	Yes
E – 780	Sewing data exceeds sewing area	Yes
E – 781	No end code in sewing data	Yes

BAS-761 38