Brother BAS-761 instruction manual Settings before sewing, Setting the folder mode

Page 25

7. Settings before sewing

7. Settings before sewing

Press FOLDER RESET SW

to start searching for home position.

7-1. Setting the folder mode

FOLDING MODE AUTO

PATTERN

LABEL

STEP

Screen 1

Note

Background color of the selected mode turns reverse on display.

1.Turn on the air pressure and then turn on the power switch.

The screen shown at left will be displayed on the panel.

2.Press the FOLDER RESET button !9. The machine head will move to the home position and then stop in the standby condition.

1.Press the FOLDING MODE button w. Screen 1 will then be displayed.

2.Press the arrow keys !8to select the mode.

If the CANCEL button !5or FOLDING MODE button w is pressed once more, the mode will not be changed and the screen will return to the original display.

3.Press the ENTER button !6. The new mode will be set and the screen will return to the original display.

7-2. Setting the sewing speed and the bar tacking speed

¡These settings can be made when the machine head is at the standby position, while the bobbin is being replaced and while sewing is stopped.

¡The bar tacking speed cannot be greater than the sewing speed. If the bar tacking speed is set to a faster speed than the sewing speed, the bar tacking speed will become the same as the sewing speed when sewing is actually carried out.

Change sewing speed.

SEWING SPEED 4000 rpm

Screen 2-1

1.Press the SEWING SPEED button u. Screen 2-1 will then be displayed.

2.Press the arrow keys !8to select the desired sewing speed.

The sewing speed can be set in 9 steps from 500 to 4,250 rpm.

*If the CANCEL button !5is pressed, the sewing speed will not be changed and the screen will return to the original display.

BAS-761

18

Image 25

Contents BAS-761 Safety Instructions Environmental requirements Installation Cleaning Thread take-up cover Belt cover Guard bar Contents Names of Machine Components Names of Machine ComponentsSpecifications Installation of the machine table InstallationRemoval of the fixing bolts from the machine Installation of the spool standConnection of the air hose Connection of the foot-switch connectorPositioning of the front supporter Installation positions for operation box and switch box Before installation Installation of the folding group assemblyLubrication Correct operation Installing the needleUpper threading X2.4 rotary hookRemoval of the bobbin case Bobbin case threadingRemoval of the bobbin X2.4 rotary hook X1.7 rotary hookBobbin thread winding Thread take-up spring X2.4 rotary hook X1.7 rotary hook Thread tensionOperation box panel buttones Button functionsTest button Test indicator Thread Monitor button Thread Monitor indicatorButton functions Sewing Speed button Counter buttonButton functions Bobbin Change button Cancel buttonEnter button Arrow keys@1 Reset button Switch box panel buttones@0 Start button @2 Emergency Stop buttonRestart buttones Foot switchSetting the folder mode Settings before sewingSetting the sewing speed and the bar tacking speed Settings before sewingTack Speed 3000 rpm Replacing the lower thread Setting the lower thread counterSetting the stacker roller feed amount Setting the piece counterChange date DATE1998/10/1 Screen Change time Time Setting the date and timePreparation for sewing Preparation for sewingRead sewing data Sewing Sewing with the folder in automatic modeSewing with the folder in pattern matching mode Sewing with the folder in label attachment mode Sewing with the folder in step mode Test feeding To stop the machine during sewing Emergency stopTo continue sewing To interrupt sewing and return to the standby positionNeedle-bar height adjustment AdjustmentsNeedle and rotary hook timing Presser foot height adjustmentRemoval of the fixed knife Removal of the fixed knife and the movable knifeRemoval of the movable knife Stacker position adjustment Sewing clamp assembly number Sewing clamp assembly number selectionUsing the DIP switches Using the DIP switchesDIP switch positions Functions of operation panel DIP switchesUsing the DIP switches Table of error code Error code Contents Reset Emergency Stop button pressed 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone