Brother BAS-761 instruction manual Preparation for sewing

Page 30

8. Preparation for sewing

8. Preparation for sewing

Press FOLDER RESET SW

to start searching for home position.

1.Apply air pressure and turn on power switch. Screen 7 will then be displayed on the panel.

2.Press the FOLDER RESET button !9.

The machine head will move to the home position and then stop in the standby condition.

Screen 7

1997/11/5 19:36:50
FOLDING MODE
PROGRAM NUMBER
SEWING SPEED	rpm
Screen 8-1

1997/11/5 19:36:50

FOLDING MODE

PIECE COUNTER BOBBIN COUNTER

Screen 8-2

1997/11/5 19:36:50

PROGRAM NUMBER PIECE COUNTER BOBBIN COUNTER

Screen 8-3

1997/11/5 19:36:50

SEWING SPEEDrpm

PIECE COUNTER BOBBIN COUNTER

Screen 8-4

1997/11/5 19:36:50
SEWING CLAMP NUMBER
STACK FEED LENGTH	mm

3.Select the normal display screen.

The screen displayed will change in the following or- der each time the arrow key !8is pressed.

Screen 8-1→screen 8-2→ ...

It will change in the following order each time the ar-

row key !8is pressed.

Screen 8-5 → screen 8-4 → ...

Screen 8-5

23

BAS-761

Image 30

Contents BAS-761 Safety Instructions Environmental requirements Installation Cleaning Thread take-up cover Belt cover Guard bar Contents Names of Machine Components Names of Machine ComponentsSpecifications Installation Installation of the machine tableInstallation of the spool stand Removal of the fixing bolts from the machineConnection of the foot-switch connector Connection of the air hosePositioning of the front supporter Installation positions for operation box and switch box Installation of the folding group assembly Before installationLubrication Upper threading Installing the needleCorrect operation X2.4 rotary hookRemoval of the bobbin Bobbin case threadingRemoval of the bobbin case X2.4 rotary hook X1.7 rotary hookBobbin thread winding Thread tension Thread take-up spring X2.4 rotary hook X1.7 rotary hookButton functions Operation box panel buttonesButton functions Sewing Speed button Thread Monitor button Thread Monitor indicatorTest button Test indicator Counter buttonEnter button Cancel buttonButton functions Bobbin Change button Arrow keys@0 Start button Switch box panel buttones@1 Reset button @2 Emergency Stop buttonFoot switch Restart buttonesSetting the sewing speed and the bar tacking speed Settings before sewingSetting the folder mode Settings before sewingTack Speed 3000 rpm Setting the lower thread counter Replacing the lower threadSetting the piece counter Setting the stacker roller feed amountSetting the date and time Change date DATE1998/10/1 Screen Change time TimePreparation for sewing Preparation for sewingRead sewing data Sewing with the folder in automatic mode SewingSewing with the folder in pattern matching mode Sewing with the folder in label attachment mode Sewing with the folder in step mode Test feeding To continue sewing Emergency stopTo stop the machine during sewing To interrupt sewing and return to the standby positionAdjustments Needle-bar height adjustmentPresser foot height adjustment Needle and rotary hook timingRemoval of the fixed knife and the movable knife Removal of the fixed knifeRemoval of the movable knife Stacker position adjustment Sewing clamp assembly number selection Sewing clamp assembly numberDIP switch positions Using the DIP switchesUsing the DIP switches Functions of operation panel DIP switchesUsing the DIP switches Table of error code Error code Contents Reset Emergency Stop button pressed 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone