Brother BAS-761 instruction manual Foot switch, Restart buttones

Page 24

6. Button functions

6-3. Foot switch

@3

Foot switch @3

When the folder is in automatic mode, this switch is used to operate the vacuum system.

When the folder is in pattern matching mode, this switch is used to raise and lower the folder table to carry out pattern matching.

When the folder is in label attachment mode, this switch is used to carry out label attaching.

When the folder is in step mode, this switch operates in the same way as in label attachment mode or automatic mode, depending on whether label attachment operations are being carried out or not.

6-4. RESTART buttones

@4

RESTART buttones @4

When these buttones are pressed simultaneously, the folder starts operating.

17

BAS-761

Image 24

Contents BAS-761 Safety Instructions Environmental requirements Installation Cleaning Thread take-up cover Belt cover Guard bar Contents Names of Machine Components Names of Machine ComponentsSpecifications Installation Installation of the machine tableInstallation of the spool stand Removal of the fixing bolts from the machineConnection of the foot-switch connector Connection of the air hosePositioning of the front supporter Installation positions for operation box and switch box Installation of the folding group assembly Before installationLubrication Installing the needle Correct operationUpper threading X2.4 rotary hookBobbin case threading Removal of the bobbin caseRemoval of the bobbin X2.4 rotary hook X1.7 rotary hookBobbin thread winding Thread tension Thread take-up spring X2.4 rotary hook X1.7 rotary hookButton functions Operation box panel buttonesThread Monitor button Thread Monitor indicator Test button Test indicatorButton functions Sewing Speed button Counter buttonCancel button Button functions Bobbin Change buttonEnter button Arrow keysSwitch box panel buttones @1 Reset button@0 Start button @2 Emergency Stop buttonFoot switch Restart buttonesSettings before sewing Setting the folder modeSetting the sewing speed and the bar tacking speed Settings before sewingTack Speed 3000 rpm Setting the lower thread counter Replacing the lower threadSetting the piece counter Setting the stacker roller feed amountSetting the date and time Change date DATE1998/10/1 Screen Change time TimePreparation for sewing Preparation for sewingRead sewing data Sewing with the folder in automatic mode SewingSewing with the folder in pattern matching mode Sewing with the folder in label attachment mode Sewing with the folder in step mode Test feeding Emergency stop To stop the machine during sewingTo continue sewing To interrupt sewing and return to the standby positionAdjustments Needle-bar height adjustmentPresser foot height adjustment Needle and rotary hook timingRemoval of the fixed knife and the movable knife Removal of the fixed knifeRemoval of the movable knife Stacker position adjustment Sewing clamp assembly number selection Sewing clamp assembly numberUsing the DIP switches Using the DIP switchesDIP switch positions Functions of operation panel DIP switchesUsing the DIP switches Table of error code Error code Contents Reset Emergency Stop button pressed 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone