Brother BAS-761 instruction manual Sewing with the folder in pattern matching mode

Page 33

9. Sewing

9-2. Sewing with the folder in pattern matching mode

r

w

e

q

@3

@4

1.Turn on the air pressure and then turn on the power switch. The following screen will be displayed on the panel.

Press FOLDER RESET SW

to start searching for home position.

2.Press the FOLDER RESET button !9. The machine head will move to the home position and then stop in the standby condition.

3.Set the folder mode to pattern matching mode.

NOTE:

Refer to page 18 for details on how to set the folder mode.

4.Press the STACKER button r so that the STACKER indicator is illuminated.

5.Place the workpiece w under the gauge assembly q. (*1)

6.Depress the foot switch @3. The vacuum system will start operating to hold the workpiece w in place.

7.Place the pocket material e on top of the gauge assembly q.

8.When the foot switch @3is released from being depressed, the gauge assembly q will drop to its lowest position. If the pattern on the pocket material e is not aligned with the pattern on the workpiece w at this time, depress the foot switch @3once more. The vacuum system will turn off and the gauge assembly q will move one step upward so that the patterns can be matched.

9.Press the RESTART buttones @4simultaneously.

The pocket material e will be folded by the folder and the workpiece w and the pocket material e will then be moved to the machine head and sewing will start. (*2)

10.Once sewing is finished, the stacker will operate and the workpiece w will be stacked. The machine head and the work clamp will then return to the standby positions.

*1 If DIP switch D-1 has been set to ON, the gauge assembly q will retract. The gauge assembly q moves forward at the same time the vacuum system starts operating when the foot switch @3is depressed.

*2 If DIP switch A-1 has been set to ON, operation stops momentarily after folding has been completed so that the folding can be checked. When the RESTART buttones @4are pressed again simultaneously, operation continues as before.

BAS-761

26

Image 33

Contents BAS-761 Safety Instructions Environmental requirements Installation Cleaning Thread take-up cover Belt cover Guard bar Contents Names of Machine Components Names of Machine ComponentsSpecifications Installation of the machine table InstallationRemoval of the fixing bolts from the machine Installation of the spool standConnection of the foot-switch connector Connection of the air hosePositioning of the front supporter Installation positions for operation box and switch box Before installation Installation of the folding group assemblyLubrication Correct operation Installing the needleUpper threading X2.4 rotary hookRemoval of the bobbin case Bobbin case threadingRemoval of the bobbin X2.4 rotary hook X1.7 rotary hookBobbin thread winding Thread take-up spring X2.4 rotary hook X1.7 rotary hook Thread tensionOperation box panel buttones Button functionsTest button Test indicator Thread Monitor button Thread Monitor indicatorButton functions Sewing Speed button Counter buttonButton functions Bobbin Change button Cancel buttonEnter button Arrow keys@1 Reset button Switch box panel buttones@0 Start button @2 Emergency Stop buttonRestart buttones Foot switchSetting the folder mode Settings before sewingSetting the sewing speed and the bar tacking speed Settings before sewingTack Speed 3000 rpm Replacing the lower thread Setting the lower thread counterSetting the stacker roller feed amount Setting the piece counterChange date DATE1998/10/1 Screen Change time Time Setting the date and timePreparation for sewing Preparation for sewingRead sewing data Sewing Sewing with the folder in automatic modeSewing with the folder in pattern matching mode Sewing with the folder in label attachment mode Sewing with the folder in step mode Test feeding To stop the machine during sewing Emergency stopTo continue sewing To interrupt sewing and return to the standby positionNeedle-bar height adjustment AdjustmentsNeedle and rotary hook timing Presser foot height adjustmentRemoval of the fixed knife and the movable knife Removal of the fixed knifeRemoval of the movable knife Stacker position adjustment Sewing clamp assembly number Sewing clamp assembly number selectionUsing the DIP switches Using the DIP switchesDIP switch positions Functions of operation panel DIP switchesUsing the DIP switches Table of error code Error code Contents Reset Emergency Stop button pressed 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan. Phone