Basic Operations
The following operations are commonly used when you play any sound source.
English
Turning the Power On and Off (Standby)
On the front panel: |
| ||
To turn on the power, press STANDBY/ON |
| . | STANDBY |
| |||
The STANDBY lamp goes off. The name of the |
| ||
current source (or station frequency) appears on | /I | ||
the display. | STANDBY/ON | ||
|
|
| |
VOLUME |
Current source | Current volume level |
name appears | is shown here |
MUTE TUNED |
| SLEEP | R | |
AUTO STEREO PRO LOGIC | HALL |
|
| VOLUME |
DAP |
|
|
|
|
CH- |
|
|
| MHz |
|
|
| kHz |
Selected source name appears
On the front panel:
DVD MULTI Select the DVD player for viewing the digital video |
disc using the analog discrete output mode (5.1CH |
reproduction) on the DVD player. |
To enjoy the DVD MULTI playback, see page 20. |
To turn off the power (into standby mode),
press STANDBY/ON | again. |
The STANDBY lamp lights up. A small amount of power is consumed in standby mode.
To turn the power off completely, unplug the AC power cord.
From the remote control:
To turn on the power, press AUDIO 
.
The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the display.
To turn off the power (into standby mode),
press AUDIO 
again.
The STANDBY lamp lights up.
STANDBY
/I
STANDBY/ON
AUDIO
DVD | Select the DVD player for viewing the stereo digital |
| video disc. |
VCR | Select the video component connected to the VCR |
| jacks. |
FM | Select an FM broadcast. |
AM | Select an AM broadcast. |
TAPE/MD | Select the cassette deck (or the MD recorder). |
PHONO | Select the turntable. |
CD | Select the CD player. |
From the remote control: | |
FM/AM | Select an FM or AM broadcast. |
| Each time you press the button, the band changes |
| alternately. |
•Other buttons function in the same way as the buttons on the front panel.
Selecting the Source to Play
Press one of the source selecting buttons.
On the front panel:
DVD MULTI | DVD | VCR | FM |
CD | PHONO | TAPE/MD | AM |
|
| SOURCE NAME |
|
From the remote control: | CD |
| TAPE/MD |
| FM/AM |
| VCR |
Note:
When connecting an MD recorder (to the TAPE/MD jacks), change the source name that appears on the display. See page 11 for details.
Selecting different sources for picture and sound
You can watch picture from a video component while listening to sound from another component.
Press one of the audio source selecting buttons (CD, TAPE/MD, PHONO, FM, AM), while viewing the picture from a video component such as the VCR or DVD player, etc.
Note:
*Once you have selected a video source, pictures of the selected source are sent to the TV until you select another video source.
*
*
Note:
DVD
When you press one of the source selecting buttons, marked above
with an asterisk (*), on the remoteDVD MULTI control, the receiver automatically
turns on.
PHONO *
8