To tune in a preset station
Selecting the FM Reception Mode
English
On the front panel:
1. Press FM or AM.
FM
When an FM stereo broadcast is hard to receive or noisy
The last station of the selected band is tuned
in.
AM
You can change the FM reception mode while receiving an FM
•MULTI CURSOR % / Þ / @/ # buttons can be now used for operating the tuner.
MULTI CURSOR
broadcast.
On the front panel ONLY:
2.Press MULTI CURSOR %/ Þ repeatedly until
3.Press MULTI CURSOR @/ #to select a preset channel station.
•Pressing @decreases the preset channel number.
•Pressing #increases the preset channel number.
From the remote control:
1. Press FM/AM.
MULTI CURSOR
FM/AM
1. Press FM.
The last station of the selected band is tuned in.
•MULTI CURSOR %/ Þ / @ / # buttons can be now used for operating the tuner.
2.Press MULTI CURSOR %/ Þ repeatedly until “FM MODE” appears on the display.
FM
MULTI CURSOR
The last station is tuned in.
•Each time you press the button, the band alternates between FM and AM.
MULTI CURSOR
3. Press MULTI CURSOR @/ #to switch the FM reception “FM MONO” or “FM AUTO.”
2. Press the 10 keys to select a preset | DELAY | TEST | SURROUND | |||
1 | 2 5 | 3 | ||||
channel number. | ||||||
EFFECT | – CENTER + |
| ||||
• For channel number 5, press 5. | 4 | 5 | 5 | 6 | 5 | |
|
|
|
|
| ||
• For channel number 15, press +10 then 5. |
|
| – REAR•L + |
| ||
• For channel number 20, press +10 then 10. | 7/P | 8 5 | 9 | |||
|
| – REAR•R + | MENU | |||
• For channel number 30, press +10, +10, |
|
|
| |||
|
| 10 | +10 | |||
then 10. | ENT |
Note:
When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 22.)
FM MONO: Reception will be improved although you will lose the stereo effect. In this mode, you will hear noise while tuning into the stations. The MUTE AUTO indicator goes off on the display.
FM AUTO: When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The MUTE AUTO indicator lights up on the display.
14