JVC RX-6012VSL manual English, Selecting the FM Reception Mode, To tune in a preset station, then

English

To tune in a preset station

On the front panel:

1. Press FM/AM to select the band

FM/AM

(FM or AM).

The last received station of the selected band is tuned in.

	SPK
ANALOG	L	R	TUNED	VOLUME

2. Press FM/AM PRESET 5/ °	FM/AM PRESET
until you find the channel you
want.

• Pressing FM/AM PRESET 5increases the channel numbers.

•Pressing FM/AM PRESET °decreases the channel numbers.

From the remote control:

1. Press FM/AM. FM/AM

•Each time you press the button, the band alternates between FM and AM.

	SPK
ANALOG	L	R	TUNED	VOLUME

2. Press 10 keys to select a preset	TEST	– SUBWOOFER +
	1	2	3
channel number.		5
	EFFECT	– CENTER +
• For channel number 5, press 5.	4	5	6
	5		5
• For channel number 15, press +10 then 5.	– VCR CH +	– REAR•L +
	7/P	8	9
• For channel number 20, press +10 then 10.
		5	MENU
• For channel number 30, press +10, +10,		– REAR•R +
		10	+10

then 10. ENTER

Note:

When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 26.)

Selecting the FM Reception Mode

When an FM stereo broadcast is hard to receive or noisy

You can change the FM reception mode while receiving an FM broadcast.

• You can store the FM reception mode for each preset station.

On the front panel ONLY:

Press FM MODE. FM MODE

• Each time you press the button, the FM reception

mode alternates between “AUTO” and “MONO.”

	SPK
ANALOG	L	R	AUTOMUTING TUNED STEREO

SPK

ANALOG L R TUNED

AUTO:When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display.

MONO:Reception will be improved although you will lose the stereo effect. In this mode, you will hear noise while tuning into the stations. The AUTO MUTING indicator goes off from the display.

17