Notes:
•When connecting an MD recorder (to the TAPE/MD jacks), and a DBS tuner (to the TV SOUND/DBS jacks), change the source names shown on the display. For details, see page 16.
•When you press one of the source selecting buttons on the remote control marked with an asterisk (*), the receiver automatically turns on.
On the front panel:
DVD MULTI | DVD | VCR 1 | VCR 2 | VIDEO | TV SOUND/DBS |
|
|
|
|
| SOURCE NAME |
PHONO | CD | CDR | TAPE / MD | USB AUDIO | FM / AM |
|
|
| SOURCE NAME |
|
|
Signal and speaker indicators on the display
The signal indicators light up in the following cases:
•Only the indicators for the incoming signals light up.
•When analog input is selected, “L” and “R” always light up.
•When “DVD MULTI” is selected as the source, “L,” “C,” “R,”
“LFE,” “LS” and “RS” light up.
The speaker indicators light up only —:
The frames of “C,” “LS,” and “RS” light up, when the corresponding speaker is set to “LARGE” or “SMALL”.
Signal indicators light up in | Speaker indicators light up |
red: | in white: |
From the remote control:
DVD | DVD MUILTI | CD | FM/AM |
TV/DBS | VIDEO | CDR | PHONO |
VCR 1 | VCR 2 | TAPE/MD | USB |
Note:
Once you have selected a video source, pictures of the selected
source are sent to the TV until you select another video source.
L | C | R | L | C | R |
SUBWFR | LFE | SUBWFR | LFE | ||
LS | S | RS | LS | S | RS |
L: • When digital input is selected: Lights up when the left
channel signal comes in.
•When analog input is selected: Always lights up.
R: • When digital input is selected: Lights up when the right
channel signal comes in.
•When analog input is selected: Always lights up.
C: Lights up when the center channel signal comes in.
LS: Lights up when the left rear channel signal comes in.
RS: Lights up when the right rear channel signal comes in.
S: Lights up when the monaural rear channel signal comes in.
LFE: Lights up when the LFE channel signal comes in.
Adjusting the Volume
On the front panel:
To increase the volume, turn MASTER
VOLUME clockwise.
To decrease the volume, turn it counterclockwise.
•When you turn MASTER VOLUME rapidly, the volume level also changes rapidly.
•When you turn MASTER VOLUME slowly, the volume level also changes slowly.
From the remote control:
To increase the volume, press VOLUME +. To decrease the volume, press VOLUME
MASTER VOLUME
+
VOLUME
− 
Note:
When “SUBWOOFER” is set to “YES,” SUBWFR lights up (see page
17).
CAUTION:
Always set the volume to the minimum before starting any source. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.
Selecting different sources for picture and sound
You can watch picture from a video component while listening to sound from another component.
Press one of the audio source selecting buttons — PHONO, CD, CDR, TAPE/MD, USB (AUDIO), FM/AM — while viewing the picture from a video component such as the VCR or DVD player,
etc.
The lamp on the front panel button for selected source lights up.
Notes:
•The volume level can be adjusted within the range of “0” (minimum) to “90” (maximum).
•If you set One Touch Operation to “ON” (see page 22), you do not have to adjust the volume level each time you change the source. It is automatically set to the stored level.
12