JVC RX-8012RSL manual Press 5/ to move To Effect Adjust Then press 2, Press 5/ to move To Midnight

7.	Press 5/ °to move
	to “EFFECT ADJUST,”	￿
	then press 2/ 3.
	The EFFECT ADJUST menu
	appears.
8.	Press 5/ °to move
	to the item you want to
	set or adjust, then press	￿
	2/ 3.

On these adjustment menus, you can do the followings:

For Surround mode:

“CENTER TONE”: Select the center tone level. *

For DAP mode, Surround mode with DAP:

“EFFECT LEVEL”:	Adjust the surround effect level.
“ROOM SIZE”:	Adjust the room size effect.
“LIVENESS”:	Adjust the liveness level.
“CENTER TONE”:	Select the center tone level. *

For 5 CH Stereo mode:

“CENTER TONE”: Select the center tone level.

For 3D-PHONIC mode:

“EFFECT LEVEL”: Adjust the surround effect level.

“CENTER TONE”: Select the center tone level. *

5.Press 5/ °to move to the item you want to set or adjust, then press 2/ 3.

On this adjustment menu, you can do the following:

“L/R BALANCE”:	Adjust the right and left balance
	of the front speakers.
“CENTER LEVEL”:	Adjust the center speaker output
	level.
“REAR L LEVEL”:	Adjust the left rear speaker output
	level.
“REAR R LEVEL”:	Adjust the right rear speaker
	output level.
“SUBWFR LEVEL”:	Adjust the subwoofer output level.

6.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Listening at Night — Midnight Mode

(Also see page 13)

1. Press MENU.

The MENU appears on the TV.

•Pressing one of the 5/ ° / 2 / 3buttons also displays the MENU.

2.Press 5/ °to move to “SOUND CONTROL,” then press 2/ 3.

The SOUND CONTROL menu appears.

3.Press 5/ °to move

to “MIDNIGHT

Notes:

MODE.”

￿

•You cannot select “EFFECT ADJUST” in step 7, when both of the Surround and DSP modes are deactivated.

*You cannot select “CENTER TONE” when “CTR SPK” is set to “NONE” (see page 17).

9.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Adjusting the DVD MULTI Playback Mode

(Also see page 39)

1. Select DVD MULTI as the playing source.

Press DVD MULTI.

2. Press MENU.

The MENU appears on the TV.

• Pressing one of the5/ °/ 2/ 3buttons also displays the MENU.

3.Press 5/ °to move to “SOUND CONTROL,” then press 2/ 3.

The SOUND CONTROL menu appears.

4. Press 2/ 3to select the mode you want to use.

5.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Attenuating the Input Signal

(Also see page 14)

1. Press MENU.

The MENU appears on the TV.

•Pressing one of the 5/ ° / 2 / 3buttons also displays the MENU.

2.Press 5/ °to move to “SOUND CONTROL,” then press 2/ 3.

The SOUND CONTROL menu appears.

3. Press 5/ °to move to “INPUT ATT.”

￿

4. Press 5/ °to move to “LEVEL ADJUST,” then press 2/ 3.

￿

4. Press 2/ 3to select the Input Attenuator mode “ATT ON” or

The LEVEL ADJUST menu appears.

￿

“NORMAL.”

5.When you finish, press EXIT repeatedly until the menu disappears from the TV.

42