JVC RX-8012RSL Press 5/ to move To Preset MEMORY, then press 2, Setting the Basic Setting Items

Storing the Preset Stations (Also see page 23)

1. Press MENU.

The MENU appears on the TV.

•Pressing one of the 5/ ° / 2/ 3buttons also displays the MENU.

2.Press 5/ °to move to “TUNER CONTROL,” then press 2/ 3.

The TUNER CONTROL menu appears.

3.Tune into a station on the TUNER CONTROL menu, referring to “Operating the Tuner”.

4.Press 5/ °to move

to “PRESET MEMORY,” then press 2/ 3.

moves to “PRESET CH”
and the channel number starts	￿
flashing.

5.Press 2/ 3to select a preset station number you want.

6.Press SET to store the setting.

The selected channel number stops flashing.

7.When you finish, press EXIT repeatedly until the menu disappears from the TV.

You can show the RDS information on the TV screen.

For details, see page 25.

Setting the Basic Setting Items

(Also see pages 17 – 22)

1. Press MENU.

The MENU appears on the TV.

• Pressing one of the 5/ ° / 2/ 3buttons also displays the

SETTING 1 menu
“SUBWOOFER”:	Set the subwoofer information (see
	page 17).
“FRONT SPK”:	Set the front speaker information (see
	page 17).
“CENTER SPK”:	Set the center speaker information (see
	page 17).
“REAR SPK”:	Set the rear speaker information (see
	page 17).
“CNTR DELAY”:	Adjust the delay time of the center
	speaker output (see page 18). *
“REAR DELAY”:	Adjust the delay time of the rear
	speaker output (see page 18). **
“CROSSOVER”:	Set the crossover frequency
	(see page 18).
“ONE TOUCH OPR”: Set the one touch operation
	(see page 22).
SETTING 2 menu
“DIGITAL 1/2/3/4”: Set the digital input terminal 1/2/3/4
	(see page 19).
“LFE ATT”:	Set the low frequency effect attenuator
	level (see page 19).
“FL DISPLAY”:	Shows the disc text information on the
	display (see page 22).

Notes:

*You cannot select “CNTR DELAY” when “CTR SPK” is set to “NONE” (see page 17).

**You cannot select “REAR DELAY” when “REAR SPK” is set to “NONE” (see page 17).

4.When you finish, press EXIT repeatedly until the menu disappears from the TV.

MENU.

2.Press 5/ °to move

to “SETTING,”

then press 2/ 3.

The SETTING 1 appears.

3.Press 5/ °to move to the item you want to set or adjust, then press

2/ 3.

•To go to the SETTING 2

menu, move to “NEXT PAGE,” then press 2/ 3.

•To go back to the SETTING

1 menu, move to “PREVIOUS PAGE,” then press 2/ 3.

On the SETTING 1 and 2 menus, you can do the following:

￿

￿

￿

44