Showing the Text Information on the
Display
When you have connected an MD recorder or CD player equipped with TEXT COMPU LINK remote control system (see page 46), you can show the text information, such as disc title or track title, on the display of this receiver. To show it on the display, follow the procedure below.
Before you start, remember....
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel ONLY:
1. Press SETTING repeatedly until “FL CT SETTING
DISP” (Display) appears on the display.
The display changes to show the current setting.
2. Press CONTROL UP 5/DOWN ° | CONTROL |
DOWN UP | |
to select either the source name or |
|
the text information to be shown |
|
on the display. |
|
•Each time you press the button, the display changes to show the following:
NORM 
TEXT (Normal)
NORM: Source name and Surround/DSP mode appear during play.
TEXT: Text information appears during play.
Note:
Though you have selected “TEXT,” the source name and Surround/
DSP mode appear if a playing disc has no text information.
Basic Setting and Adjustment — Auto Memory
Without any setting required, this receiver stores different sound settings for each different playing source automatically whenever you do the following:
•Turning on the power (see page 11)
•Changing the source to play (see page 11)
•Changing the source name (see page 16)
So, you do not have to change the sound settings next time you select the same source. The stored settings for the selected source are automatically recalled.
The following settings are automatically stored for each source:
•Front speaker output balance (see page 16)
•Subwoofer setting and its output level (see page 17)
•Input attenuator mode (see page 14)
•Midnight mode (see page 13)
•Bass boost (see page 14)
•Digital equalization adjustment (see page 15)
•Line direct (see page 14)
•Surround mode on/off (see page 30)
•Surround/DSP mode setting (see pages 31 – 38)
•DVD MULTI playback mode setting (see page 39)
•Analog/digital input mode (see page 20)
You can assign and store the volume level for each source. See below.
Notes:
•If the source is FM or AM (MW/LW), you can assign different settings for each band.
•You cannot assign and store different settings for each digital input mode.
•The Surround modes and DSP modes cannot be used with DVD MULTI playback mode at the same time.
To store the volume level
Before you start, remember....
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel ONLY:
1. | Press SETTING repeatedly until “ONE | ECT | SETTING |
| TOUCH” appears on the display. |
|
|
|
|
| |
| The display changes to show the current setting. |
|
|
|
|
| |
2. | Press CONTROL UP 5/DOWN ° | CONTROL | |
|
| DOWN UP | |
to turn on the One Touch Operation.
The ONE TOUCH OPERATION indicator lights up on the display.
•Each time you press the button, the one touch operation function turns on (“ON”) and off (“OFF”).
To recall the volume level
With the ONE TOUCH OPERATION indicator lit, the volume level for the currently selected source is recalled when the source is selected.
To cancel the One Touch Operation
Select “OFF” in step 2 above so that the ONE TOUCH OPERATION indicator goes off. (Even though the One Touch Operation is canceled, the recalled volume remains active.)
22