JVC RX-8012RSL, RX-8010RBK FM tuner IHF, AM MW/LW tuner, General, Monaural DBf 3.2 µV/75 Stereo

Page 63

FM tuner (IHF)

Tuning Range:

Usable Sensitivity:

50 dB Quieting Sensitivity:

Signal-to-Noise Ratio (IHF-A weighted):

Total Harmonic Distortion:

Stereo Separation at REC OUT:

Alternate Channel Selectivity:

Frequency Response:

AM (MW/LW) tuner

Tuning Range:

Usable Sensitivity:

Signal-to-Noise Ratio:

General

Power Requirements:

Power Consumption:

Dimensions (W × H × D):

Mass:

87.50 MHz to 108.00 MHz

 

Monaural:

17.0 dBf (1.95 µV/75

Ω)

Monaural:

21.3 dBf (3.2 µV/75

Ω)

Stereo:

41.3 dBf (31.5 µV/75

Ω)

Monaural:

78 dB at 85 dBf

 

Stereo:

73 dB at 85 dBf

 

Monaural:

0.4% at 1 kHz

 

Stereo:

0.6% at 1 kHz

 

35 dB at 1 kHz

60 dB: (±400 kHz)

30 Hz to 15 kHz: (+0.5 dB, –3 dB)

MW:

522 kHz to

1 629 kHz

LW:

144 kHz to

288 kHz

Loop antenna

400 µV/m (MW)

 

50 dB (100 mV/m)

AC 230V , 50 Hz

210 W (at operation)

2 W (in standby mode)

435 mm × 156.5 mm × 425 mm (17 3/16 in. × 6 3/16 in. × 16 3/4 in.)

11.5 kg (25.4 lbs)

Designs & specifications are subject to change without notice.

60

Page 62 Page 64
Image 63
Page 62 Page 64
Contents LVT0618-004A RX-8010RBK / RX-8012RSLIf in Doubt Consult a Competent Electrician RX-8010RBK RX-8012RSL Table of Contents Parts Identification Remote Control Front PanelGetting Started Before InstallationChecking the Supplied Accessories Connecting the FM and AM MW/LW AntennasAM MW/LW Antenna Connections Connecting the SpeakersBasic connecting procedure Connecting the front speakersAbout the speaker impedance Connecting Audio/Video ComponentsConnecting the rear and center speakers Connecting the subwoofer speakerVideo component connections Output TV and/or DBS tunerVideo camera To audioDigital Connections Digital input terminalsDigital output terminal USB cable Change the PC audio settingUSB Connection Lamp on the USB Audio button lights upReplace the cover Connecting the Power CordPutting Batteries in the Remote Control Plug the power cord into an AC outletSelecting the Source to Play Turning the Power On and Off StandbyBefore using the remote control Basic OperationsAdjusting the Volume Signal and speaker indicators on the displaySelecting different sources for picture and sound Muting the Sound Listening at Night Midnight ModeFrom the remote control only Selecting the Front SpeakersActivating the Subwoofer Sound Attenuating the Input Signal Reinforcing the BassSelecting the Line Direct Function Adjusting the Equalization Patterns Using the Sleep TimerRecording a Source Basic Settings Adjusting the Front Speaker Output BalanceChanging the Source Name Setting the Subwoofer Information Adjusting the Subwoofer Output LevelSetting the Speakers for a Surround Field Press Control UP 5/DOWN Control CTR Delay Center Delay Appears on the displayTo select the delay time Press Setting repeatedly until ECT SettingLFE ATT Low Frequency Effect Attenuator appears on Display Digital Input Digital in Terminal SettingPress Setting again until Digital 2/3/4 terminals setting appears on the displaySelecting the Analog or Digital Input Mode Press ANALOG/DIGITAL Input To change the input modeTouch appears on the display Basic Setting and Adjustment Auto MemoryTo store the volume level Showing the Text Information on DisplayTuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Press FM/AM Press FM/AM Preset 5/untilSelecting the FM Reception Mode Press FM ModeSearching for a Program by PTY Codes Using the RDS Radio Data System to Receive FM StationsWhat information can RDS signals provide? To search for a program using the PTY codesFlashing Press PTY Search whileListening to an FM station Press PTY Search while listening to an FM stationPress TA/NEWS/INFO until Switching to a Broadcast Program Your Choice TemporarilyPress EON so that the last selected Program type appears on DisplayCreating a Surround Field in Your Room Surround modesDSP modes Reproducing the Sound Field DVD Multi Playback ModeDSP Modes Available to Input Mode Headphone DSP modeAvailable DSP modes Available DSP Modes According to the Speaker ArrangementAdjusting the Surround Modes Adjust the speaker output levels Adjust the center toneAdjusting the DAP Modes DAP mode you want to adjust Adjust the room size sense of spaciousnessAdjust the liveness Press DSP Mode repeatedly untilAdjusting the Surround Modes with DAP Modes To select the effect level you want Press Liveness to adjustLiveness Adjust the speaker output levels Adjust the overall levels of the effectOnly Adjusting the 5 CH/4 CH Stereo ModePress DSP Mode repeatedly until DSP Mode Press DSP Mode repeatedly until ModeAdjusting the 3D-PHONIC Modes Memo Center tone level you wantMulti appears on the display Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Press DVD Multi so that DVDPress Menu Using the On-Screen MenusCONTROL, then press 2 Press 5 / to move to Sound CONTROL, then press 2Press 5 / to move to Digital EQ Then press 2Select DVD Multi as the playing source Press 5/ to move To Effect Adjust Then press 2Press 5/ to move to Sound CONTROL, then press 2 Press 5/ to move To MidnightSelecting the Bass Boost Function Select FM or AM MW/LW as the playing sourcePress 5/ to move to Tuner CONTROL, then press 2 Selecting the Line Direct FunctionSetting the Basic Setting Items Press 5/ to move To Preset MEMORY, then press 2Press 5/ to move To Setting Then press 2 Storing the Preset Stations Also seeCompu Link Remote Control System Same timePress the play 3 button on the CD player Disc Search Only for CD Player Text Compu Link Remote Control SystemCD player MD recorder Displaying the Disc Information on the TV screenPress Exit Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen To exit from the Disc information screenPress 5 / to move To Performer Then press SET Press Text Display while CD is selected as the sourcePress 5 / to move to SEARCH, then Press 5/ to move to SEARCH, then Press SETEntering the Disc Information Press 5 / to move to SEARCH, then Press SETPress 5 / to move To GENRE, then Press SET Press 5/ to move to Title Input Then press SETFor the CD Player with the disc memory function Enter the disc title Referring to steps 3Press 5/ to move to the genre you want, then press SET Press Text Display while MD is selected as the sourceSound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCD recorder CD playerCD changer TurntableTV/VIDEO Operating Video ComponentsVCR 1 VCR connected to the VCR 1 jacks DVD playerTry to operate your TV by pressing TV If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Release TVRelease CATV/DBS Release VCRTry to operate your VCR by pressing VCR Release Audio Problem Possible Cause Solution TroubleshootingOverload starts flashing on the display Video SpecificationsAmplifier AudioGeneral Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF AM MW/LW tunerJVC 0401NHMMDWJEIN
Top Page Image Contents