JVC RX-8012RSL manual Press PTY Search while, Listening to an FM station, Flashing, PTY codes

On the front panel:

1. Press PTY SEARCH while	PTY SEARCH
listening to an FM station.

“PTY SELECT” flashes on the display.

PTY codes

	None
Alarm !	News

2.Press CONTROL UP 5/DOWN ° until the PTY code you want appears on the display, while

“PTY SELECT” is flashing.

The display gives you the PTY codes described to the right.

3.Press PTY SEARCH again, while the PTY code selected in the previous step is still on the display.

CONTROL

DOWN UP

PTY SEARCH

TEST	Affairs
Documemt	Info (Information)
Folk M (Music)	Sport
Oldies	Educate (Education)
Nation M (Music)	Drama
Country	Culture

While searching, “SEARCH” and the selected PTY code alternate on the display.

The receiver searches 30 preset FM stations, stops when it finds the one you have selected, and tunes in that station.

To continue searching after the first stop

Press PTY SEARCH again while the indications on the display are flashing.

If no program is found, “NOTFOUND” appears on the display.

Jazz	Science
Leisure	Varied
Travel	Pop M (Music)
Phone In	Rock M (Music)
Religion	Easy M (Music)

From the remote control:

1. Press PTY SEARCH while listening to an FM station.

“PTY SELECT” flashes on the display.

2.Press PTY + or PTY – until the PTY code you want appears on the display, while “PTY SELECT” is

flashing.

The display gives you the PTY codes described to the right.

3.Press PTY SEARCH again, while the PTY code selected in the previous step is still on the display.

PAUSE

SET

PTY SEARCH

FF/

PTY

/REW

PTY

PAUSE

SET

PTY SEARCH

Social	Light M (Music)
Children	Classics
Finance	Other M (Music)
	Weather

When an emergency broadcast (Alarm ! signal) is sent from an FM station:

The receiver automatically tunes in the station except in the following cases:

•When you are listening to non-RDS stations (all AM — MW/LW and some FM stations).

•When the receiver is in standby mode.

While searching, “SEARCH” and the selected PTY code alternate on the display.

The receiver searches 30 preset FM stations, stops when it finds the one you have selected, and tunes in that station.

To continue searching after the first stop

Press PTY SEARCH again while the indications on the display are flashing.

If no program is found, “NOTFOUND” appears on the display.

While receiving an emergency broadcast, “Alarm !” appears on the display.

The TEST signal is used for equipment test — whether it can receive the Alarm ! signal correctly.

The TEST signal makes the receiver work in the same way as the Alarm ! signal does. If the TEST signal is received, the receiver automatically switches to the station broadcasting the TEST signal. While receiving the test signal, “TEST” appears on the display.

26