Weider 831.153933 user manual

34.Remove the preattached 3 1/2” Pulleys (78) from the Double “U”-bracket (62).

Wrap the Butterfly Cable (69) under a 3 1/2” Pulley

(78).Attach the Pulley to the Double “U”-bracket

(62)with a 3/8” x 1 3/4” Bolt (93) and a 3/8” Nylon Locknut (87).

35.Wrap the Butterfly Cable (69) over a “V”-pulley (55). Attach the Pulley and a Long Cable Trap (102) to the other bracket on the Butterfly Upright (3) with a 3/8” x 2 1/2” Bolt (18) and a 3/8” Nylon Locknut

(87).Make sure that the Long Cable Trap is turned to hold the Cable in the groove of the Pulley.

36.Attach the Butterfly Cable (69) to the Pivot Bracket

(70)on the Right Butterfly Arm (26) with a 5/16” x 1” Shoulder Bolt (103) and a 5/16” Nylon Locknut (86).

37.Locate the Leg Lever Cable (75), which is 98 1/2” long and has an eyelet on one end and a thread- ed pin on the other end. Route the eyelet end of the Cable through the Seat Upright (9) and attach it to the tab on the Leg Lever (10) with a 5/16” x 1” Shoulder Bolt (103) and a 5/16” Nylon Locknut (86).

38.Attach a 3 1/2” Pulley (78) inside of the Seat Upright (9) with a 3/8” x 2 3/4” Bolt (101), two 3/8” Washers (91), two 1/2” Spacers (89), and a 3/8” Nylon Locknut (87), as shown.

15

34
		69
		78
	93	87
	62
35	18
	102
	69
	55		3
			87
36	103	69
	70
	26	86
37
	86		75
			9
	10
	103
38
	91 89	78	75
	87
			91
		89	101