Nylon Locknuts yet | Weider 831.153933 manual

57.Attach the Seat (16) to the Seat Frame (8) with two 1/4” x 3/4” Screws (114), a 1/4” x 2 1/2” Screw (99), and a 1/4” Washer (97).

58.Attach the Butterfly Backrest (15) to the Butterfly Upright (3) with two 1/4” x 3 1/2” Screws (128) and two 1/4” Washers (97).

59.Wet one end of the Squat Arm (32) with soapy water. Slide a Short Pad (20) onto the Squat Arm as shown.

Slide two Nut Clips (108) onto a Squat Handle (33). Attach the Squat Handle to the Squat Arm (32) with two 5/16” x 3/4” Button Head Screws (51). Slide an Inner Cap w/Hole (111) onto the Squat Handle and press it onto the end of the Squat Arm. Wet the Squat Handle with soapy water. Slide an 8” Handgrip (84) onto the Squat Handle.

Repeat this step with the other end of the Squat Arm (32).

60.Attach the Squat Arm (32) to the Squat Bracket (37) with two 3/8” x 2 1/2” Carriage Bolts (106) and two 3/8” Nylon Locknuts (87). Do not tighten the

Nylon Locknuts yet.

Finish attaching the Squat Arm (32) to the Squat Bracket (37) with two 3/8” x 3” Carriage Bolts (126), a Small Support Plate (127), and two 3/8” Nylon Locknuts (87).

Tighten all of the 3/8” Nylon Locknuts (87) used in this step.

57
		16
		8
			97
		114
			99
58
				128
				97
		15
			3	97
				128
59			20
		32	20
		32
		51
			20
				108
		51	108
			108
				33
				111
			84
60	87	87
	87	127	32
		127	32
				106
			126	37

57
		16
		8
			97
		114
			99
58
				128
				97
		15
			3	97
				128
59			20
		32	20
		32
		51
			20
				108
		51	108
			108
				33
				111
			84
60	87	87
	87	127	32
		127	32
				106
			126	37

57
		16
		8
			97
		114
			99
58
				128
				97
		15
			3	97
				128
59			20
		32	20
		32
		51
			20
				108
		51	108
			108
				33
				111
			84
60	87	87
	87	127	32
		127	32
				106
			126	37

57
		16
		8
			97
		114
			99
58
				128
				97
		15
			3	97
				128
59			20
		32	20
		32
		51
			20
				108
		51	108
			108
				33
				111
			84
60	87	87
	87	127	32
		127	32
				106
			126	37