Weider 831.14622.0 user manual Seat Assembly, Repeat this step for the Left Butterfly Pad

39.Attach the Leg Lever Cable (51) to the Upright (2) with the M10 x 120mm Bbolt (115), an M10 Washer (80), a 7mm Spacer (111), and an M10 Nylon Locknut (77). Make sure the flat edge of the Cable is against the Spacer.

Seat Assembly

40.Attach the Right Butterfly Pad (35) to the Right Butterfly Arm (26) with two M6 x 60mm Button Screws (91) and two M6 Washers (114).

Repeat this step for the Left Butterfly Pad (34).

41.Attach the Backrest (31) to the Backrest Frame

(7) with two M6 x 16mm Screws (88), an M6 x 32mm Screw (89), and an M6 Washer (114).

Insert the Backrest Frame (7) into the Upright (2) and tighten the Backrest Adjustment Knob (53) into the Upright. Make sure the Adjustment

Knob passes through one of the holes in the Backrest Frame.

39
2	Flat Edge
115
	80
	111
51	77
40
26
114
35
91
34
41
88
7
31
2	53
89
114

22