Weider 831.14622.0 user manual

Page 23

42.Attach the Seat (32) to the Seat Frame (8) with two M6 x 16mm Screws (88), an M6 x 32mm Screw (89), and an M6 Washer (114).

Insert the Seat Frame (8) into the Frame (9). Tighten the Seat Adjustment Knob (52) into the Frame and the Seat Frame. Make sure the

Adjustment Knob passes through one of the holes in the Seat Frame.

43.Insert a Pad Tube (13) through the indicated hole in the Front Leg (10). Slide a Foam Pad (36) onto each end of the Pad Tube.

Press a Pad Cap (37) into an end of each Foam Pad (36).

Repeat this step for the other Pad Tube (13) and the Leg Lever (12). Note: Lift the Leg Lever Cable (51) when inserting a Pad Tube through through the hole in the bottom of the Leg Lever.

44.Attach the Butterfly Cover (30) to the Butterfly Bracket (5) with four M4 x 12mm Self-tapping Screws (102).

23

42

 

 

 

32

 

 

 

 

 

 

114

8

 

 

89

 

 

 

88

 

 

 

 

9

52

43

 

 

 

37

 

 

10

 

 

 

36

 

 

 

12

 

 

 

 

 

 

13

51

 

 

 

13

 

 

36

 

 

 

 

 

 

37

44

 

 

 

 

102

 

 

30

102

5

 

 

 

 

 

 

Image 23
Contents Sears, Roebuck and Co., Hoffman Estates, IL Model No Serial NoTable of Contents Important Precautions Left Side Before YOU BeginRight Side Part Identification CHART-Model No .14622.0 R1006A M10 x 61mm Bolt Set Part Identification CHART-Model No .14622.0 R1006A Make Assembly Easier for Yourself AssemblyEnd of the Leg Lever Bumper is pointing up Frame AssemblyNylon Locknuts yet Nylon Locknuts 78. Do not tighten the Nylon Locknuts yetRepeat this step for the Right Shroud Shroud Cover 23 in the same manner This step clearly See the inset drawing and attach the otherDo not tighten the Nylon Locknuts yet Arm AssemblySee the left inset drawing. Attach the Lock Plate Repeat this step for the Left Butterfly Arm Tighten the Nylon Locknuts 77 used in step Bend Repeat this step for the Left Press Arm not shownCable Assembly Grease Flat Edge Page Page Page Page Cable Trap and Half Guards are oriented as shown Knob passes through one of the holes in the Backrest Frame Seat AssemblyRepeat this step for the Left Butterfly Pad Page Page Attaching the Accessories AdjustmentsChanging the Weight Setting Locking the Weight Stack Using the Curl PADAdjusting the Backrest Seat 32 can be adjusted in the same mannerLbs Weight Resistance ChartWeight High Butterfly Press ARM LEG Lever LOW Pulley Locking the LEG LeverCable Diagram Tightening the Cables MaintenanceExercise Guidelines Staying Motivated Muscle ChartCooling Down Thursday Aerobic Exercise Date Exercise Weight Sets RepsDate Aerobic ExerciseKey Qty Description Part LIST-Model NoR1006A Exploded DRAWING-Model NoExploded DRAWING-Model No Get it fixed, at your home or ours DAY Full Warranty