Weider 831.14622.0 user manual Cable Trap and Half Guards are oriented as shown

Page 21

36.Wrap the Leg Lever Cable (51) under a 90mm Pulley (48). Attach the Pulley to the Right Press Arm (16) with an M10 x 50mm Bolt (97), two Half Guards (55), a Cable Trap (56), an M10 Washer (80), and an M10 Nylon Locknut (77). Make sure the Cable Trap and Half Guards are oriented as shown.

37.Wrap the Leg Lever Cable (51) around a “V”-pul- ley (47). Attach the Pulley to the Upright (2) with an M10 x 70mm Bolt (119), two Half Guards (55), an M10 Washer (80), a Long Cable Trap (57), and an M10 Nylon Locknut (77). Make sure the

Cable Trap and Half Guards are oriented as shown.

38.Wrap the Leg Lever Cable (51) around a 90mm Pulley (48). Attach the Pulley to the Left Press Arm (15) with an M10 x 50mm Bolt (97), two Half Guards (55), an M10 Washer (80), and a Cable Trap (56). Make sure the Cable Trap and Half

Guards are oriented as shown.

36
55		51
	80	51
77		55 97
48
56	16
37		2
55		2
57		77
47		77
47
80
55
	51
		113
38
	97
		51	15
		48
		55 80
		56	77
		55	77

21

Image 21

Contents Sears, Roebuck and Co., Hoffman Estates, IL Model No Serial NoTable of Contents Important Precautions Before YOU Begin Right SideLeft Side Part Identification CHART-Model No .14622.0 R1006A M10 x 61mm Bolt Set Part Identification CHART-Model No .14622.0 R1006A Make Assembly Easier for Yourself AssemblyNylon Locknuts yet Frame AssemblyNylon Locknuts 78. Do not tighten the Nylon Locknuts yet End of the Leg Lever Bumper is pointing upRepeat this step for the Right Shroud Shroud Cover 23 in the same manner This step clearly See the inset drawing and attach the otherArm Assembly See the left inset drawing. Attach the Lock PlateDo not tighten the Nylon Locknuts yet Repeat this step for the Left Butterfly Arm Tighten the Nylon Locknuts 77 used in step Bend Repeat this step for the Left Press Arm not shownCable Assembly Grease Flat Edge Page Page Page Page Cable Trap and Half Guards are oriented as shown Seat Assembly Repeat this step for the Left Butterfly PadKnob passes through one of the holes in the Backrest Frame Page Page Adjustments Changing the Weight SettingAttaching the Accessories Adjusting the Backrest Using the Curl PADSeat 32 can be adjusted in the same manner Locking the Weight StackWeight High Butterfly Press ARM LEG Lever LOW Pulley Weight Resistance ChartLocking the LEG Lever LbsCable Diagram Tightening the Cables MaintenanceExercise Guidelines Muscle Chart Cooling DownStaying Motivated Date Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DateKey Qty Description Part LIST-Model NoR1006A Exploded DRAWING-Model NoExploded DRAWING-Model No Get it fixed, at your home or ours DAY Full Warranty