Weider 831.159822 user manual Repeat this step with the Left Butterfly Arm

14. Lubricate an M10 x 80mm Button Head Bolt (97)	14				97
and both sides of two Plastic Washers (55) with		Lubricate
grease. Attach the Right Butterfly Arm (11) to the		Welded
Butterfly Frame (9) with the Bolt, the two Plastic		Bushing	55		54
Washers, two Butterfly Caps (54), and an M10		11
Nylon Locknut (70). Do not overtighten the
Locknut; the Butterfly Arm must be able to		55
pivot easily. Be sure the indented sides of the			54
Plastic Washers fit over the welded bushing in
the Butterfly Arm.		Lubricate			9	10
			70
Repeat this step with the Left Butterfly Arm
(10).
15. Attach the Bumper (25) to the Right Leg (73) with	15
an M4 x 20mm Self-tapping Screw (77).
					73
Press two 38mm x 50mm Inner Caps (23) into		23	Lubricate
the ends of the Leg Lever (4).
Lubricate an M10 x 65mm Bolt (99) with grease.		70
Attach the Leg Lever (4) to the Right Leg (73)
					25
with the Bolt and an M10 Nylon Locknut (70). Do			99	77
not overtighten the Locknut; the Leg Lever
		4
must be able to pivot easily.
		23
16. Press a 50mm x 63mm Inner Cap (22) into the	16
top of the Leg Press Frame (30).
					22
Lubricate an M10 x 80mm Bolt (61) with grease.
Attach the Leg Press Frame (30) to the Left Base
(2) with the Bolt and an M10 Nylon Locknut (70).
Do not overtighten the Locknut; the Leg Press					30
Frame must be able to pivot easily.
					70
			61
				Lubricate
		2

10