8.Slide the eight Weights (72) onto the Weight Guides (20) with the pin grooves on the side shown.
Press the Weight Tube Bumper (32) into the bot- tom of the Weight Tube (82). Insert the Weight Tube into the center hole in the stack of Weights (72). Be sure the Weight Tube is oriented as shown.
Lubricate the indicated holes in the Top Weight (74). Slide the Top Weight onto the Weight Guides (20), with the pin groove on the bottom.
9.Press two 50mm x 63mm Inner Caps (22) into the ends of the Left Top Frame (3).
Attach the Left Top Frame (3) to the Left Upright
(7) with two M8 x 85mm Bolts (59), a Support Plate (21), and two M8 Nylon Locknuts (71). Do not tighten the Locknuts yet.
10.Press a 50mm x 63mm Inner Cap (22) into the end of the Right Top Frame (8).
Attach the Right Top Frame (8) to the Right Upright (6) with two M8 x 85mm Bolts (59), a Support Plate (21), and two M8 Nylon Locknuts (71).
Attach the Right Top Frame (8) to the Left Top Frame (3) with two M8 x 70mm Bolts (81), two M8 Washers (75), and two M8 Nylon Locknuts (71).
Do not tighten the M8 Nylon Locknuts (71) yet.
8 | Lubricate |
|
20 |
| |
|
| |
74 |
|
|
| Holes |
|
| 82 |
|
Pin | 32 |
|
Groove |
| |
| 72 |
|
9 |
|
|
22 | 59 |
|
| 21 |
|
3 |
|
|
71 |
| 22 |
|
| |
| 71 |
|
7 |
|
|
10 |
|
|
59 |
|
|
21 |
|
|
8 |
| 75 |
22 | 71 | 81 |
| 3 | 75 |
|
| |
71 | 71 |
|
|
| |
| 6 |
|
8