Weider 831.159822 user manual Screw 68. Do not fully tighten the Screw

Page 20

53. Insert the two Locking Pins (53) into the Butterfly	53
Frame (9). Attach the tether on the Pins to the	53
Frame (9). Attach the tether on the Pins to the		53
Butterfly Frame with an M4 x 10mm Self-tapping		53
Butterfly Frame with an M4 x 10mm Self-tapping
Screw (68). Do not fully tighten the Screw.
		68
	9	53
		53

54.Make sure that all parts have been properly tightened. The use of all remaining parts will be explained in ADJUSTMENTS, starting on the following page.

Before using the weight system, pull each cable a few times to make sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly routed, they may be damaged when heavy weight is used. See the CABLE DIAGRAM on pages 24 and 25 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables; see TIGHTENING THE CABLES on page 22.

20

Image 20

Contents Weight System Exerciser User’s Manual Model No Serial NoTable of Contents Important Precautions Before YOU Begin Right SideLeft Side Decal Foot PlateBolts fall out, place tape over the Bolt heads AssemblyMake Things Easier for Yourself Do not tighten the M8 Nylon Locknuts 71 yet Do not tighten the M8 Nylon Locknuts 71 yet Lubricate Holes Pin Groove Tighten all of the M8 Nylon Locknuts 71 used in steps Butterfly Frame must be able to pivot easilyBracket must be able to pivot easily Repeat this step with the Left Butterfly ArmRepeat this step with the Left Butterfly Arm Ing the cables Locate the High Cable 45. Route the Cable up Cable Trap is turned to hold the CablePage 100 Page 100 Page Page Page Repeat this step with the Short Pad Tube Leg Lever Pin is in the locked position around Leg Press FrameScrew 68. Do not fully tighten the Screw Adjustments Attaching the Accessories to a Pulley StationChanging the Weight Setting Converting the Butterfly ArmsAdjusting the LEG Press Plate Tightening the CablesLbs Top Weight Resistance ChartWeight High Press LEG Butter LOW Pulley ARM FLY ARM Lever Cable Diagrams Butterfly Cable High Cable Low CableCable ID Chart Leg Press CableLeg Lever Cable 46 47 3/7 96 95 1/2 95 148 1/4 47 276 3/4 45 116 3/4Exercise Guidelines Staying Motivated Muscle ChartCooling Down Part Identification CHART-Model No .159822 R0103A M8 x 65mm Bolt Part LIST-Model No Qty DescriptionExploded DRAWING-Model No Full 90 DAY Warranty Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL