Weider 831.159822 user manual 100

Page 15

33.Locate the Leg Lever Cable (96). Route the eyelet end of the Cable through the Right Leg (73) and attach it to the Leg Lever (4) with an M8 x 20mm Shoulder Bolt (78) and an M8 Nylon Locknut (71).

34.Attach a 90mm Pulley (38) inside the Right Leg (73) with an M10 x 70mm Bolt (100), two M10 Washers (50), two 13mm Spacers (34), and an M10 Nylon Locknut (70).

35.Route the Leg Lever Cable (96) through the Right Upright (6) and under a 90mm Pulley (38). Attach the Pulley inside the Upright with an M10 x 70mm Bolt (100), two M10 Washers (50), two 13mm Spacers (34), and an M10 Nylon Locknut (70).

36.Wrap the Leg Lever Cable (96) around a 90mm Pulley (38). Attach the Pulley and a Cable Trap

(91)to the second set of holes from the bottom of the indicated Double “U”-Bracket (56) with an

M10 x 50mm Bolt (62) and an M10 Nylon Locknut

(70).Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

33
4
71	73
	73
96	78
	78
34
70	73	38
70	73
50
	34
		50
		34
		100
35		70
		70
		50 34
	6	38
	6
	96
		34
	50
		100
36
	70	56
	70
	91
		62
	38
		96

15

Image 15

Contents Model No Serial No Weight System Exerciser User’s ManualTable of Contents Important Precautions Foot Plate Before YOU BeginRight Side Left Side DecalAssembly Make Things Easier for YourselfBolts fall out, place tape over the Bolt heads Do not tighten the M8 Nylon Locknuts 71 yet Do not tighten the M8 Nylon Locknuts 71 yet Lubricate Holes Pin Groove Repeat this step with the Left Butterfly Arm Tighten all of the M8 Nylon Locknuts 71 used in stepsButterfly Frame must be able to pivot easily Bracket must be able to pivot easilyRepeat this step with the Left Butterfly Arm Cable Trap is turned to hold the Cable Ing the cables Locate the High Cable 45. Route the Cable upPage 100 Page 100 Page Page Page Pin is in the locked position around Leg Press Frame Repeat this step with the Short Pad Tube Leg LeverScrew 68. Do not fully tighten the Screw Converting the Butterfly Arms AdjustmentsAttaching the Accessories to a Pulley Station Changing the Weight SettingTightening the Cables Adjusting the LEG Press PlateWeight Resistance Chart Weight High Press LEG Butter LOW Pulley ARM FLY ARM LeverLbs Top Butterfly Cable High Cable Low Cable Cable Diagrams46 47 3/7 96 95 1/2 95 148 1/4 47 276 3/4 45 116 3/4 Cable ID ChartLeg Press Cable Leg Lever CableExercise Guidelines Muscle Chart Cooling DownStaying Motivated Part Identification CHART-Model No .159822 R0103A M8 x 65mm Bolt Qty Description Part LIST-Model NoExploded DRAWING-Model No Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL Full 90 DAY Warranty