Weider PRO 375 user manual 4661

Page 14

32.Attach the Curl Pad (77) to the Curl Post (83) with two M6 x 16mm Screws (61).

Press the two Weight Adapter Bushings (46) into the Weight Adapter (42).

33.Make sure all parts are properly tightened before you use the weight bench. The use of all remaining parts will be explained in ADJUSTMENTS, starting on the following page.

32

77

83

42

46

4661

14

Image 14
Contents Customer HOT Line QUESTIONS?Model No. WEBE29320 Serial No Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Before YOU Begin Right SideLocknuts yet AssemblyMake Things Easier for Yourself Locknuts yet Make sure the Safety Spotters are oriented exactly as shown Tighten the M8 x 20mm Screws 50 used in steps 6Angled End Weight Tube Bracket Tighten all M10 Nylon Locknuts 11 used Steps Nylon Locknut the Pulley must be able to Turn freelyPage Nylon Locknuts yet Tighten the M10 Nylon Locknuts 11 used in steps Nylon Locknut the Backrest must be able to pivot freely 4661 Using the Safety Spotters AdjustmentsUsing the Locking BAR Tightening the Cables Attaching Weights to the Barbell or the Weight CarriageUsing the LEG Lever Locknut the Pulley must turn freelyAdjusting the Backrest Attaching the Curl PADExercise Guidelines Staying Motivated Muscle ChartCooling Down Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Part Identification Chart M6 x 36mm BoltPart LIST-Model No. WEBE29320 Qty DescriptionExploded DRAWING-Model WEBE29320