Weider PRO 375 user manual Locknuts yet

Page 6

3.Attach an Upright (1) to each Base (7) using four Joint Plates (12), eight M10 x 80mm Bolts (41), and eight M10 Nylon Locknuts (11). Make sure the Uprights are oriented exactly as shown. Do not tighten the Nylon Locknuts yet.

4.Insert a Weight Guide (18) into the indicated hole in each Base (7). Attach the Weight Guides to the Bases using two M10 x 75mm Bolts (39), four M10 Small Washers (6), and two M10 Nylon Locknuts (11). Do not tighten the Nylon

Locknuts yet.

5.Press a 25mm Bushing (48) into each end of the Locking Bar (34). Slide the Barbell (35) into the Locking Bar.

3
1
41
7	1
12
		7
12
	11
	12
	12	41
		41
4
18
39
6	7
6
6
11	18
	18
	11	39
	6	39
	6
	7	6
	7
5
48	34
		35
	48

6

Image 6

Contents Customer HOT Line QUESTIONS?Model No. WEBE29320 Serial No Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Before YOU Begin Right SideAssembly Make Things Easier for YourselfLocknuts yet Locknuts yet Make sure the Safety Spotters are oriented exactly as shown Tighten the M8 x 20mm Screws 50 used in steps 6Angled End Weight Tube Bracket Tighten all M10 Nylon Locknuts 11 used Steps Nylon Locknut the Pulley must be able to Turn freelyPage Nylon Locknuts yet Tighten the M10 Nylon Locknuts 11 used in steps Nylon Locknut the Backrest must be able to pivot freely 4661 Adjustments Using the Locking BARUsing the Safety Spotters Tightening the Cables Attaching Weights to the Barbell or the Weight CarriageUsing the LEG Lever Locknut the Pulley must turn freelyAdjusting the Backrest Attaching the Curl PADExercise Guidelines Muscle Chart Cooling DownStaying Motivated Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part Identification Chart M6 x 36mm BoltPart LIST-Model No. WEBE29320 Qty DescriptionExploded DRAWING-Model WEBE29320