ATTACHING THE CURL PAD
For some exercises, the Curl Pad (77) must be attached to the weight bench. Insert the Curl Post
(83)into the Front Leg (73). Align the holes in the Front Leg and the Curl Post. Secure the Curl Post with the Curl Post Knob (86). Make sure that you fully tighten the Curl Post Knob.
WARNING: When the Curl Pad (77) is not in use, store it away from the bench so it will not interfere with other exercises.
ADJUSTING THE BACKREST
The Backrest (69) can be adjusted to five positions. To adjust the Backrest, pull the Backrest Knob (80) out as far as it will go and move the Backrest up or down. Reinsert the Knob through a hole in the Backrest Bracket (53).
WARNING: Make sure the Backrest Knob (80) is securely inserted into one of the holes in the Backrest Bracket (53) before put- ting any weight on the Backrest (69).
77 |
|
83 | 86 |
| |
| 73 |
| 69 |
| 80 |
| 53 |
17