Weider PRO 375 user manual Important Precautions

Page 3

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of serious injury, read the following important precautions before using the weight bench.

1.Read all instructions in this manual before using the weight bench. Use the weight bench only as described in this manual.

2.It is the responsibility of the owner to ensure that all users of the weight bench are ade- quately informed of all precautions.

3.The weight bench is intended for home use only. Do not use the weight bench in any commercial, rental, or institutional setting.

4.Use the weight bench only on a level surface. Cover the floor beneath the weight bench to protect the floor.

5.Make sure all parts are properly tightened each time you use the weight bench. Replace any worn parts immediately.

6.Keep children under 12 and pets away from the weight bench at all times.

7.Keep hands and feet away from moving parts.

8.Always wear athletic shoes for foot protec- tion while exercising.

9.Make sure that the cables remain on the pul- leys at all times. If the cables bind as you are exercising, stop immediately and make sure that the cables are on the pulleys.

10.Always set both weight gliders and both safety spotters at the same height.

11.The weight bench is designed to support a maximum user weight of 300 pounds. Do not place more than 300 pounds, including the barbell, on the weight gliders or safety spot- ters. Do not place more than 150 pounds on the weight carriage or the leg lever. Note: The weight bench does not include weights.

12.Always place an equal amount of weight on each side of the weight carriage or barbell.

13.Always secure the weights with the weight clips when they are mounted on the weight carriage or barbell.

14.Always lower the weight carriage in a con- trolled manner; never let the weight carriage drop.

15.Always remove the lat bar when performing an exercise that does not require the use of the lat bar.

16.Always move your bench out of the way when performing an exercise that does not use the bench.

17.If you feel pain or dizziness at any time while exercising, stop immediately and begin cool- ing down.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

3

Image 3
Contents Mon.-Fri., 6 a.m.-6 p.m. MST QUESTIONS?Model No. WEBE29320 Serial No Customer HOT LineTable of Contents Important Precautions Right Side Before YOU BeginAssembly Make Things Easier for YourselfLocknuts yet Locknuts yet Tighten the M8 x 20mm Screws 50 used in steps 6 Make sure the Safety Spotters are oriented exactly as shownAngled End Weight Tube Bracket Nylon Locknut the Pulley must be able to Turn freely Tighten all M10 Nylon Locknuts 11 used StepsPage Nylon Locknuts yet Tighten the M10 Nylon Locknuts 11 used in steps Nylon Locknut the Backrest must be able to pivot freely 4661 Adjustments Using the Locking BARUsing the Safety Spotters Locknut the Pulley must turn freely Attaching Weights to the Barbell or the Weight CarriageUsing the LEG Lever Tightening the CablesAttaching the Curl PAD Adjusting the BackrestExercise Guidelines Muscle Chart Cooling DownStaying Motivated Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT M6 x 36mm Bolt Part Identification ChartQty Description Part LIST-Model No. WEBE29320Exploded DRAWING-Model WEBE29320