22. Attach the Long Cable (23) to the Small “U”-
Bracket (67) with a 1/4” Nylon Locknut (2) and a 1/4” Washer (10). Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable so only a couple of threads are showing above the Nylon Locknut, as shown in the inset drawing.
ASSEMBLYCABLE | Attach the Small | |
Weight Tube (63) with the 5/16” x 1 3/4” Bolt | ||
|
(72) and a 5/16” Nylon Locknut (3).
23.Attach the Backrest (41) to the Front Upright (42) with two 1/4” x 2 1/2” Screws (43) and two 1/4” Washers (10).
ASSEMBLY | 24. Press a 1 1/2” Square Inner Cap (32) into the |
| |
SEAT | Seat Frame (36). |
the Seat Plate to the Seat (13) with two 1/4” x | |
| Insert the 1/4” x 2” Carriage Bolt (38) through |
the centre hole in the Seat Plate (37). Attach 1/2” Screws (18).
Insert the 1/4” x 2” Carriage Bolt (38) into the indicated hole in the Seat Frame (36). Tighten a 1/4” Nylon Locknut (2) with a 1/4” Washer (10) onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Seat Frame (36) with the 1/4” x 2” Screw (24) and a 1/4” Washer (10).
22 |
|
|
|
|
|
| 23 |
| 3 |
| 72 |
|
|
| |
|
|
| 67 |
|
|
| 63 |
| 10 |
|
|
| 2 |
|
|
57 | 23 |
|
|
|
|
| |
| 10 |
|
|
| 2 |
|
|
23 |
|
| 42 |
|
|
| |
|
|
| 41 |
| 43 | 10 |
|
24 |
|
|
|
|
|
| 13 |
|
| 38 | 37 |
|
|
| 32 |
| 36 |
| 18 |
| 24 | 10 | 2 |
14