Weider WEEVSY87210 user manual

Page 3

The decals shown below have been placed on the weight system in the locations shown. If decals are missing or illegible, please call our Customer Service Department to order free replacement decals (see the back cover of this manual). Apply the decals in the locations shown.

! WARNING

• Misuse of this product may result in serious injury.

• Read user’s manual and follow all warnings and operating instruc- tions prior to use.

• Do not allow children on or around machine.

• Replace label if damaged, illegible, or removed.

3

Image 3

Contents Model No. WEEVSY87210 Serial No QUESTIONS?Important Precautions Table of ContentsPage Using the weight system. If you have additional Before YOU BeginFor your benefit, read this manual carefully before Do not tighten the Nylon Locknuts yet AssemblyFrame Assembly Following Tools not Included are Required for AssemblyTighten all Nylon Locknuts used in steps 1 through Nylon Locknuts yetNylon Locknut yet Locknut yetFrame Assembly Frame Assembly ARM Assembly Sure that the holes in the Weight GuidesAre at the top, as shown Axle-Lubricate Cable Assembly Be sure that the 5/16 x 5 Bolt 68 is tight Ened Cable Assembly Be sure that the Cable is routed Around the Pulley as shown Seat AssemblyPin Seat AssemblyPage Changing the Weight Setting HOW to USE the Weight SystemAttaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley StationChanging the Stepping Resistance Locking the Weight Stack Weight Resistance Chart Troubleshooting and Maintenance Tightening the CablesReplace all cables every two years Cable Diagram Long Cable 23 TOP ViewShort Cable Page Ordering Replacement Parts Remove this Part Identification Chart from the Manual Page X 2 1/2 Screw Save this Part LIST/EXPLODED Drawing for Future Reference Remove this Part LIST/EXPLODED Drawing from the ManualQty Description Part LIST-Model No. WEEVSY87210Drawing