Weider WEEVSY87210 user manual Remove this Part Identification Chart from the Manual

Page 25

REMOVE THIS PART IDENTIFICATION

CHART FROM THE MANUAL

This chart is provided to help you identify the small parts used in assembly. Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has been pre-assembled.

IMPORTANT: Assembly is divided into four stages: 1) frame assembly, 2) arm assembly, 3) cable assembly, and 4) seat assembly. The hardware for each stage is packaged separately. Wait until you begin each assem- bly stage to open that parts bag.

Image 25

Contents Model No. WEEVSY87210 Serial No QUESTIONS?Important Precautions Table of ContentsPage Before YOU Begin Using the weight system. If you have additionalFor your benefit, read this manual carefully before Frame Assembly AssemblyFollowing Tools not Included are Required for Assembly Do not tighten the Nylon Locknuts yetNylon Locknut yet Nylon Locknuts yetLocknut yet Tighten all Nylon Locknuts used in steps 1 throughFrame Assembly Sure that the holes in the Weight Guides Frame Assembly ARM AssemblyAre at the top, as shown Axle-Lubricate Cable Assembly Be sure that the 5/16 x 5 Bolt 68 is tight Ened Cable Assembly Be sure that the Cable is routed Around the Pulley as shown Seat AssemblyPin Seat AssemblyPage Changing the Weight Setting HOW to USE the Weight SystemAttaching the LEG Lever to the LOW Pulley Station Attaching and Removing the SeatChanging the Stepping Resistance Locking the Weight Stack Weight Resistance Chart Tightening the Cables Troubleshooting and MaintenanceReplace all cables every two years Long Cable 23 TOP View Cable DiagramShort Cable Page Ordering Replacement Parts Remove this Part Identification Chart from the Manual Page X 2 1/2 Screw Save this Part LIST/EXPLODED Drawing for Future Reference Remove this Part LIST/EXPLODED Drawing from the ManualQty Description Part LIST-Model No. WEEVSY87210Drawing