Weider WESY96352 user manual Cable Assembly

Page 16

CABLE ASSEMBLY

32.Wrap the Military Press Cable (72) around a

3 1/2” Pulley (15). Attach the Pulley to the Top Frame (55) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21).

See the inset drawing. Wrap the Long Cable (72) around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the bracket on the Stabilizer (5) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21). Be sure that the Cable Trap is turned to hold the Cable in place.

33.Wrap the Military Press Cable (72) around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the Pivot Arm (101) with the 3/8” x 3 3/4” Bolt (88), a 3/8” Flat Washer (9), and a 3/8” Nylon Locknut (21). Be sure that the Nylon Locknut is on the side shown and that the Cable Trap is posi- tioned to hold the Cable in place.

16

32
	55
15
21	12
	12
	72
		72
		12
		Bracket
		66
		15
		21
		5
33
	15
88	66
88
	101	9
	101
	72	21

Image 16

Contents Model No. WESY96352 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Dimensions Before YOU BeginAssembly Frame AssemblyFollowing Tools not Included are Required for Assembly Frame AssemblyNylon Locknuts yet Tighten all Nylon Locknuts used in steps Tube is sitting in the pin grooves in the top Weight Locate and open the parts bag labeled ARM Assembly ARMBushings should fit on each end of the indi Cated tube in the Base. Make sure thatARM Assembly Do not tighten the Nylon Locknut yetARM Assembly Cable Assembly Long Cable Trap is positioned to hold Cable in place Nylon Locknut the Pulley Bracket Must be able to move freelyCable Assembly Locate the Low Cable 23. Route the Low Locate the Military Press Cable 72. Attach Cable Assembly Pulley move smoothly Cable Assembly Seat Assembly Locate and open the parts bag labeled Seat AssemblySeat Assembly Seat Assembly VKR Assembly Locate and open the parts bag labeled VKR AssemblyWeider HOW to USE the Home GYM System Changing the Weight SettingAttaching and Removing the Seat Adjusting the LEG Press PlateAttaching the LEG Lever to the LOW Pulley Station Weight Resistance Chart PlatesTroubleshooting and Maintenance Tightening the CablesCable Diagrams TOP ViewMilitary Press Cable 72 and Leg Press Cable Pivot Arm Leg Press CablePage Page Page Part LIST-Model No. WESY96352 WESY96352 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT