Weider WESY96352 Seat Assembly VKR Assembly, Locate and open the parts bag labeled VKR Assembly

Page 20

SEAT ASSEMBLY

VKR ASSEMBLY

43.Press two 3/4” Round Inner Caps (34) into each Pad Tube (28).

Insert a Pad Tube (28) into the Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube.

Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Foam Pad (30) onto each end of the Pad Tube.

44.Locate and open the parts bag labeled “VKR ASSEMBLY.”

Press 1 1/2” Square Inner Caps (32) into the ends of the Left VKR Arm (79) and the Right VKR Arm (80).

Attach the Left VKR Arm (79) and the Right VKR Arm (80) to the VKR Upright (74) with two 5/16” x 3” Bolts (75) and two 5/16” Nylon Locknuts (3).

45.Attach the VKR Backrest (77) to the VKR Upright (74) with two 1/4” x 2 1/2” Screws (43) and two 1/4” Flat Washers (10).

Attach a VKR Armrest (78) to the Right VKR Arm (80) with two 1/4” x 2” Machine Screws (81) and two 1/4” Flat Washers (10).

Attach a VKR Armrest (78) to the Left VKR Arm (79) in the same manner.

20

43
		30
		34
		28
	29	34
	29
	30
44
80	75
80
		3
		74
		79
32
45
78
	74	43
		10
10
	80	79
		79
	81
	78
77

Image 20

Contents Customer HOT Line QUESTIONS?Model No. WESY96352 Serial No Table of Contents Important Precautions Dimensions Before YOU BeginAssembly Frame AssemblyFollowing Tools not Included are Required for Assembly Frame AssemblyNylon Locknuts yet Tighten all Nylon Locknuts used in steps Tube is sitting in the pin grooves in the top Weight Locate and open the parts bag labeled ARM Assembly ARMBushings should fit on each end of the indi Cated tube in the Base. Make sure thatARM Assembly Do not tighten the Nylon Locknut yetARM Assembly Cable Assembly Long Cable Trap is positioned to hold Cable in place Nylon Locknut the Pulley Bracket Must be able to move freelyCable Assembly Locate the Low Cable 23. Route the Low Locate the Military Press Cable 72. Attach Cable Assembly Pulley move smoothly Cable Assembly Seat Assembly Locate and open the parts bag labeled Seat AssemblySeat Assembly Seat Assembly VKR Assembly Locate and open the parts bag labeled VKR AssemblyWeider HOW to USE the Home GYM System Changing the Weight SettingAttaching the LEG Lever to the LOW Pulley Station Adjusting the LEG Press PlateAttaching and Removing the Seat Weight Resistance Chart PlatesTroubleshooting and Maintenance Tightening the CablesCable Diagrams TOP ViewMilitary Press Cable 72 and Leg Press Cable Pivot Arm Leg Press CablePage Page Page Part LIST-Model No. WESY96352 WESY96352 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty