Weider WESY96352 user manual Nylon Locknuts yet

FRAME ASSEMBLY

2. Slide the VKR Upright (74) and the Leg Press	2		27
Upright (56) onto the indicated 5/16” x 2 1/2”
		27
Carriage Bolts (1) in the Stabilizer (5). The
high side of the brackets on the VKR
Upright and Leg Press Upright should be
on the side shown. Hand-tighten four 5/16”		87
Nylon Locknuts (3) onto the Carriage Bolts.			High Sides
Do not tighten the Nylon Locknuts yet.		91	of Brackets
Press two 2” Square Inner Caps (27) into the		74
			56
Leg Press Upright (56). Press a 2” Square
		27
Inner Cap into the VKR Upright (74).
Attach the Rubber Bumper (91) to the Leg
Press Upright (56) with the #8 x 1/2” Self-tap-
ping Screw (87).
		3
			5
			1
		1
3. Slide the Front Upright (42) onto the 5/16” x	3
2 1/2” Carriage Bolts (1) in the Base (4).
Hand-tighten a 5/16” Nylon Locknut (3) onto
each Carriage Bolt. Do not tighten the
Nylon Locknuts yet.
Press a 1” Square Inner Cap (6) into the
Front Upright (42).
			42
			6
			3
		4
			1

6