Weider WESY96352 user manual Weider

Page 21

46.Remove the adhesive backing from the PRO 9635 decal and apply it to the Front Upright (42) under the “WEIDER” nameplate as shown.

46

WEIDER

Nameplate

42

PRO 9635

Decal

47.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in HOW TO USE THE HOME GYM SYSTEM, beginning on page 22 of this manual.

Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAMS on page 26 and 27 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLESHOOTING AND MAINTENANCE on page 25.

21

Image 21

Contents QUESTIONS? Model No. WESY96352 Serial NoCustomer HOT Line Table of Contents Important Precautions Before YOU Begin DimensionsFrame Assembly AssemblyFollowing Tools not Included are Required for Assembly Frame AssemblyNylon Locknuts yet Tighten all Nylon Locknuts used in steps Tube is sitting in the pin grooves in the top Weight ARM Locate and open the parts bag labeled ARM AssemblyBushings should fit on each end of the indi Cated tube in the Base. Make sure thatDo not tighten the Nylon Locknut yet ARM AssemblyARM Assembly Cable Assembly Nylon Locknut the Pulley Bracket Must be able to move freely Long Cable Trap is positioned to hold Cable in placeCable Assembly Locate the Low Cable 23. Route the Low Locate the Military Press Cable 72. Attach Cable Assembly Pulley move smoothly Locate and open the parts bag labeled Seat Assembly Cable Assembly Seat AssemblySeat Assembly Locate and open the parts bag labeled VKR Assembly Seat Assembly VKR AssemblyWeider Changing the Weight Setting HOW to USE the Home GYM SystemAdjusting the LEG Press Plate Attaching and Removing the SeatAttaching the LEG Lever to the LOW Pulley Station Plates Weight Resistance ChartTightening the Cables Troubleshooting and MaintenanceTOP View Cable DiagramsLeg Press Cable Military Press Cable 72 and Leg Press Cable Pivot ArmPage Page Page Part LIST-Model No. WESY96352 WESY96352 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT