Weider WESY39523 user manual Repeat this step with the other end of the Squat Arm, Locknuts yet

Page 20

57.Press two 20mm x 40mm Inner Caps (116) and a 25mm x 40mm Square Inner Cap (117) into the Seat Bracket (11).

Attach the Seat (16) to the Seat Bracket (11) with two M6 x 16mm Screws (114), an M6 x 35mm Screw (99), and an M6 Washer (97).

Turn the indicated Adjustment Handle (65) counter- clockwise several turns to loosen it. Next, pull the Handle and insert the Seat Bracket (11) into the Seat Frame (8). Engage the Handle into one of the holes in the Seat Bracket, and then turn the Handle clockwise until it is tight.

58.Press two 20mm x 40mm Inner Caps (116) and a 25mm x 40mm Square Inner Cap (117) into the Backrest Bracket (13).

Attach the Butterfly Backrest (15) to the Backrest Bracket (13) with four M6 x 16mm Screws (114).

Turn the indicated Adjustment Handle (65) counter- clockwise several turns to loosen it. Next, pull the Handle and insert the Backrest Bracket (13) into the Butterfly Upright (3). Engage the Handle into one of the holes in the Backrest Bracket, and then turn the Handle clockwise until it is tight.

59.Wet one end of the Squat Arm (32) with soapy water. Slide a Short Pad (20) onto the Squat Arm as shown.

Attach a Squat Handle (33) to the Squat Arm (32) with two M8 x 20mm Button Head Screws (51). Slide an Outer Cap w/Hole (111) onto the Squat Handle and press it onto the end of the Squat Arm. Wet the Squat Handle with soapy water. Slide an 200mm Handgrip (84) onto the Squat Handle.

Repeat this step with the other end of the Squat Arm (32).

60.Attach the Squat Arm (32) to the Squat Bracket (37) with two M10 x 65mm Carriage Bolts (110) and two M10 Nylon Locknuts (87). Do not tighten the

Locknuts yet.

Finish attaching the Squat Arm (32) to the Squat Bracket (37) with two M10 x 70mm Carriage Bolts (106), two M10 Washers (91), and two M10 Nylon Locknuts (87).

Tighten all of the M10 Nylon Locknuts (87) used in this step.

20

57

 

 

 

 

 

 

16

 

 

 

 

 

 

116

 

 

11

 

97

 

 

116

99

 

 

114

117

 

 

 

 

 

8

 

 

 

65

58

 

 

116

3

 

 

 

 

 

 

 

 

 

15

 

114

 

 

 

 

 

 

 

 

65

 

 

 

 

117

 

 

 

 

114

 

 

 

 

13

 

 

 

116

 

59

 

 

 

20

 

32

 

 

 

 

 

 

 

51

 

 

 

 

 

20

 

 

51

 

 

 

 

 

 

33

 

 

 

111

 

 

 

84

 

60

 

87

 

 

87

91

91

 

 

 

 

 

 

 

 

 

 

 

 

32

 

 

 

 

 

 

110

 

 

 

106

 

 

 

 

 

37

Image 20
Contents Customer HOT Line QUESTIONS?Model No. WESY39523 Serial No Table of Contents Important Precautions DecalUsing the weight system. If you have additional Before YOU BeginFor your benefit, read this manual carefully before DecalAssembly Frame Assembly Do not tighten the Locknuts yet Page Assemble the other weight stack in the same way Butterfly Frame must be able to pivot easily Open the parts bag labeled ARM AssemblyTighten all of the M10 Nylon Locknuts 87 used in steps Cable Assembly 119 100 118 100 102 Trap is turned to hold the Cable in the groove of the Pulley Page Page Trap is turned to hold the Cable in the groove of the Pulley Trap is turned to hold the Cable in the groove of the Pulley Seat Assembly Locate and open the parts bag labeled Seat AssemblyTighten all of the M10 Nylon Locknuts 87 used in this step Repeat this step with the other end of the Squat ArmLocknuts yet Page Adjustments Changing the Weight SettingConverting the Butterfly Arms Ing any exerciseAdjusting the Squat ARM, SEAT, or Butterfly Backrest Adjusting the Squat Knee RestLbs Top Weight Resistance ChartStation Troubleshooting Tightening the CablesButterfly Cable Swivel High Cable Squat Cable Cable DiagramsLat Cable Swivel Low Leg LeverSwivel Cable Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Page Part Identification CHART-Model No. WESY39523 R0103APage Page Remove this Part LIST/EXPLODED Drawing From the Manual Part LIST-Model No. WESY39523 Key Qty DescriptionExploded