Weider WESY39523 user manual

Page 8

7.Press a 50mm x 75mm Inner Cap (58) into the top of the Squat Upright (4). Press two 25mm Round Outer Cap (121) onto the Upright. Slide the Squat Upright onto the two indicated M10 x 65mm Carriage Bolts (110) in the Long Base (101). Finger tighten an M10 Nylon Locknut (87) onto each Carriage Bolt. Do not tighten the Locknuts yet.

Press a 50mm x 75mm Inner Cap (58) into the top of the Swivel Upright (5). Slide the Swivel Upright onto the two indicated M10 x 65mm Carriage Bolts

(110)in the Long Base (101). Finger tighten an M10 Nylon Locknut (87) onto each Carriage Bolt. Do not tighten the Locknuts yet.

8.Press two Swivel Bushings (66) into the Swivel Carriage (46).

Tighten an Adjustment Handle (65) into the Swivel Carriage (46). Orient the Swivel Carriage as shown. Slide the Carriage onto the Swivel Upright (5) and engage the Adjustment Handle into an adjustment hole in the Swivel Upright.

7
58
58
5
4
87
	121
121
110	87
101	87
	110
8
66
65	46
66
5
Adjustment
Hole

8

Image 8

Contents Customer HOT Line QUESTIONS?Model No. WESY39523 Serial No Table of Contents Important Precautions DecalUsing the weight system. If you have additional Before YOU BeginFor your benefit, read this manual carefully before DecalAssembly Frame Assembly Do not tighten the Locknuts yet Page Assemble the other weight stack in the same way Butterfly Frame must be able to pivot easily Open the parts bag labeled ARM AssemblyTighten all of the M10 Nylon Locknuts 87 used in steps Cable Assembly 119 100 118 100 102 Trap is turned to hold the Cable in the groove of the Pulley Page Page Trap is turned to hold the Cable in the groove of the Pulley Trap is turned to hold the Cable in the groove of the Pulley Seat Assembly Locate and open the parts bag labeled Seat AssemblyTighten all of the M10 Nylon Locknuts 87 used in this step Repeat this step with the other end of the Squat ArmLocknuts yet Page Adjustments Changing the Weight SettingConverting the Butterfly Arms Ing any exerciseAdjusting the Squat ARM, SEAT, or Butterfly Backrest Adjusting the Squat Knee RestLbs Top Weight Resistance ChartStation Troubleshooting Tightening the CablesButterfly Cable Swivel High Cable Squat Cable Cable DiagramsLat Cable Swivel Low Leg LeverSwivel Cable Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Page Part Identification CHART-Model No. WESY39523 R0103APage Page Remove this Part LIST/EXPLODED Drawing From the Manual Part LIST-Model No. WESY39523 Key Qty DescriptionExploded