4.Press a 38mm Square Inner Cap (67) into the Upright Extension (12).
Attach the Upright Extension (12) to the Butterfly Upright (3) with two M10 x 95mm Bolts (92), two M10 Washers (91), and two M10 Nylon Locknuts (87). Make sure the warning decals on each side of the Extension are
Slide the Butterfly Upright (3) onto the two indicated M10 x 65mm Carriage Bolts (110) in the Short Base
(2). Finger tighten an M10 Nylon Locknut (87) onto each Carriage Bolt. Do not tighten the Locknuts yet.
Tighten an Adjustment Handle (65) into the Butterfly Upright (3).
5.Press a 50mm x 75mm Inner Cap (58) into the top of the Seat Upright (9). Attach the Leg Lever Bumper (77) to the Seat Upright with an M4 x 20mm
Slide the Seat Upright (9) onto the two indicated M10 x 65mm Carriage Bolts (110) in the Short Base
(2).Finger tighten an M10 Nylon Locknut (87) onto each Carriage Bolt. Do not tighten the Locknuts yet.
6.Hold the Seat Frame (8) between the Seat Upright
(9)and the Butterfly Upright (3). Attach the Seat Frame to the Seat Upright with two M10 x 95mm Bolts (92), two M10 Washers (91), and two M10 Nylon Locknuts (87). Do not tighten the Locknuts yet.
Attach the Seat Frame (8) to the Butterfly Upright
(3)with two M10 x 95mm Bolts (92), two M10
Washers (91), and two M10 Nylon Locknuts (87).
Do not tighten the Locknuts yet.
Tighten an Adjustment Handle (65) into the Seat Frame (8).
7
4 |
|
|
|
| 92 |
| 87 |
| 12 |
|
|
|
|
| 91 |
| 67 |
|
|
| 92 | Warning | |
| 3 |
| Decal |
|
|
| |
|
|
| 65 |
|
|
| 87 |
| 87 |
|
|
| 2 |
|
|
|
|
| 110 |
5 | 58 |
|
|
|
|
| |
77 | 9 |
|
|
14 | 87 |
|
|
| 2 |
| |
|
|
| |
120 | 87 |
|
|
|
| 110 |
|
6 |
|
|
|
| 87 |
|
|
8 |
| 91 | |
| 87 |
| 92 |
|
|
| |
|
| 65 |
|
|
|
| 91 |
91 |
| 3 |
|
|
|
| |
92 | 9 |
|
|
|
|
| |
| 91 |
|
|