Washing environmentally and economically
EcoFeedback
You can call up information about the energy and water consumption of your washing machine with the EcoFeed‐ back sensor.
The following information will appear in the display:
–an estimate of the consumption be‐ fore the programme begins.
–the energy and water consumption to date during the programme.
–the energy and water consumption of the programme which has just been run at the end of the programme.
1. Estimate
After selecting a programme, touch the EcoFeedback sensor.
The estimated energy consumption lev‐ els will be displayed as a bar chart.
Energy | |
|
|
Touch the or sensor to change to the estimated water consumption levels.
Water
The more bars () visible, the higher the energy or water consumption.
The estimate will vary depending on the wash programme, temperature and any options selected.
The display will change automatically or you can return to the standard display by touching the OK sensor.
2. Actual consumption
Tip: At the end of the programme, be‐ fore opening the door, you can view the actual amount of energy and water used by the programme which has just been run.
Touch the EcoFeedback sensor.
Energy | 0,9 kWh |
|
|
Touch the or to switch to the water consumption display.
If the door is opened or the washing machine switches off automatically at the end of the programme, the da‐ ta will revert to the estimated con‐ sumption.
Total consumption setting
–This setting gives a total of the ener‐ gy consumption and water consump‐ tion to date.
See "Settings".
26