Miele 09 844 920 operating instructions Suds cooling, Anti-crease

Page 97

Settings

Suds cooling

When this is activated, additional wa‐ ter flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes.

Suds cooling takes place when a tem‐ perature of 70°C or higher is selected for the Cottons programme.

Suds cooling should be activated:

–to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin.

–where drainage pipes do not comply with DIN 1986.

Factory default setting: Suds cooling is switched off.

Anti-crease

The anti-crease function helps prevent creasing if laundry is not going to be removed immediately after the end of the programme.

The drum continues to turn at intervals for up to 30 minutes at the end of the programme. The door can be opened at any time.

Factory default setting: anti-crease is switched on.

97

Image 97

Contents Operating instructions for washing machines Contents To cancel delay start and begin the programme straight away Cleaning the containers and hoses Contents Disposal of the packing mate‐ rial Caring for the environmentDisposal of your old machine Correct application Safety with children Page Page Correct use Page Accessories Control panel Operating the washing machine sensor Delay startOK button  sensorExamples on how to operate the machine Setting the language Before using for the first timeMessages Removing the protective foil and stickersRunning the first programme Removing the detergent car‐ tridges from the drumTwinDos Miele 2 Phase System Liquid detergent/Fabric conditionerHow TwinDos works Inserting cartridges/containers Using cartridges Using containers Settings for UltraPhase 1 and UltraPhase Open the Settings menuSettings for other types of detergent Standard display will then appear Washing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentEcoFeedback Total consumption settingEstimate Actual consumptionSort the laundry Prepare the laundryPre-treat stains General tipsSelect a programme Switch on the washing ma‐ chineProgramme selection Selecting a programme via the programme selectorOpen the door Close the door Load the washing machineSelect a temperature Select programme settingsDegree of soiling Selecting a spin speed Switch on delay start if re‐ quiredSelect options Add detergent Miele 2 Phase SystemTwinDos Detergent dispenser drawer Inserting a capsule CapDosingActivating CapDosing Deactivating/changing CapDosing Start the programme Start the programme the end of a programmeAt the end of a programme Final spin speed SpinningFinal spin speed in the pro‐ gramme Rinse and interim spinTo omit rinse and interim spin and the final spin To omit the final spin Rinse holdTo select delay start Delay startTo begin delay start To change delay startCottons Cold to 90C Max. load 8.0 kg Programme chartCottons Minimum iron Cold to 60C Max. load 4.0 kgWoollens  Cold to 40C Delicates Cold to 60CSilks  Cold to 30C Automatic plus Cold to 40C Max .0 kgProofing 40C Max. load 2.5 kg Outerwear Cold to 40C Max. load 2.5 kgSportswear Cold to 60C Max. load 3.0 kg Maintenance wash 75C EmptySeparate rinse / Starch Max. load 8.0 kg Express Cold to 40C QuickPower wash 60C 40C Max. load 5.0 kgShirts Cold to 60C Dark garments Cold to 60CProgrammeManager OptionsShort Pre-ironing Water plus StainsWash programme chart ProgrammeManager Options Garment care label symbols Main wash Rinses Spinning Programme sequenceSpecial features in the pro‐ gramme sequence Changing the programme sequence Cancelling a programmeInterrupting a programme Changing a programmeDoor cannot be opened, if To activate the safety lock Safety lockTo deactivate the safety lock Detergent Miele recommended detergents Detergent Manual dispensing Automatic dispensingAdding fabric conditioner or liquid starch separately Colour run and dye removers/dyesCleaning the drum Hygiene info Cleaning and careCleaning the detergent dis‐ penser drawer External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the siphon tube and the channelCleaning the containers and hoses Cleaning the TwinDos systemCleaning the water inlet filter Programme does not start Problem solving guideProblem Cause and remedy Pumps are dirty Excessive foam has built up during washing Problems with TwinDos General problems with the washing machine Uid in the capsule Problem Cause and remedy At the end of the pro‐There is water next to Capsule in the fabricAn unsatisfactory wash result Door will not open Blocked drain outlet Procedure for draining the washing machineOpening the door Optional accessories After sales serviceGuarantee U.K Guarantee Other countriesFront view Installation and connectionRear view Removing the transit bars Installation surfaceInstallation and connection Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetWasher-dryer stack Building under a continuous work‐ top/ in a kitchen runPlease note Waterproof System WPS Water protection systemInlet hose Drain hose Electronic unit  and drainage and overflow protectionConnection to the water sup‐ ply Extension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSTechnical data Consumption data Consumption data Opening the Settings menu SettingsSelecting a setting Changing a settingLanguage  Buzzer volumeDetergent/amount Keypad toneCode Temperature unitDisplay brightness Dark displayMemory Machine switch-offPre-wash Cottons Gentle actionWater plus level Reduce tempMaximum rinse level Anti-crease Suds coolingDetergent Optional accessoriesSpecialist detergents Additives Fabric careMachine care products Page Page Page United Kingdom WKH 120 WPS