Miele 09 844 920 operating instructions To omit the final spin Rinse hold

Page 38

Spinning

To omit the final spin (Rinse hold)

Use the Spin speed button to select the  setting (Rinse hold). The laun‐ dry is not spun after the final rinse and remains in the final rinse water. This helps prevent creasing if the laundry is not going to be removed from the drum immediately after the end of the programme.

–To start the final spin:

The washing machine will display the maximum spin speed possible. You can select a spin speed lower than this. Start the final spin by pressing the Start/Stop button.

–To end the programme:

Use the Spin speed button to select the 0 rpm setting (Without spin) and press the Start/Stop button.

The water will drain away.

To omit rinse and interim spin and the final spin

Press the Spin speed button.

Select the 0 rpm setting.

After the last rinse, the water will be pumped away and the anti-crease phase will switch in.

In some programmes an additional rinse is introduced with this setting.

38

Image 38

Contents Operating instructions for washing machines Contents To cancel delay start and begin the programme straight away Cleaning the containers and hoses Contents Disposal of your old machine Caring for the environmentDisposal of the packing mate‐ rial Correct application Safety with children Page Page Correct use Page Accessories Operating the washing machine Control panelOK button Delay start sensor  sensorExamples on how to operate the machine Messages Before using for the first timeSetting the language Removing the protective foil and stickersRemoving the detergent car‐ tridges from the drum Running the first programmeHow TwinDos works Miele 2 Phase System Liquid detergent/Fabric conditionerTwinDos Inserting cartridges/containers Using cartridges Using containers Open the Settings menu Settings for UltraPhase 1 and UltraPhaseSettings for other types of detergent Standard display will then appear Energy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentEstimate Total consumption settingEcoFeedback Actual consumptionPre-treat stains Prepare the laundrySort the laundry General tipsProgramme selection Switch on the washing ma‐ chineSelect a programme Selecting a programme via the programme selectorLoad the washing machine Open the door Close the doorDegree of soiling Select programme settingsSelect a temperature Select options Switch on delay start if re‐ quiredSelecting a spin speed TwinDos Miele 2 Phase SystemAdd detergent Detergent dispenser drawer Activating CapDosing CapDosingInserting a capsule Deactivating/changing CapDosing At the end of a programme Start the programme the end of a programmeStart the programme Final spin speed in the pro‐ gramme SpinningFinal spin speed Rinse and interim spinTo omit the final spin Rinse hold To omit rinse and interim spin and the final spinTo begin delay start Delay startTo select delay start To change delay startCottons Programme chartCottons Cold to 90C Max. load 8.0 kg Minimum iron Cold to 60C Max. load 4.0 kgSilks  Cold to 30C Delicates Cold to 60CWoollens  Cold to 40C Automatic plus Cold to 40C Max .0 kgOuterwear Cold to 40C Max. load 2.5 kg Proofing 40C Max. load 2.5 kgSeparate rinse / Starch Max. load 8.0 kg Maintenance wash 75C EmptySportswear Cold to 60C Max. load 3.0 kg Shirts Cold to 60C QuickPower wash 60C 40C Max. load 5.0 kgExpress Cold to 40C Dark garments Cold to 60COptions ProgrammeManagerWater plus Pre-ironing Short StainsWash programme chart ProgrammeManager Options Garment care label symbols Programme sequence Main wash Rinses SpinningSpecial features in the pro‐ gramme sequence Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeDoor cannot be opened, if To deactivate the safety lock Safety lockTo activate the safety lock Detergent Miele recommended detergents Detergent Automatic dispensing Manual dispensingColour run and dye removers/dyes Adding fabric conditioner or liquid starch separatelyCleaning the detergent dis‐ penser drawer Cleaning and careCleaning the drum Hygiene info External casing and fascia panelCleaning the siphon tube and the channel Cleaning the detergent dispenser drawer housingCleaning the TwinDos system Cleaning the containers and hosesCleaning the water inlet filter Problem solving guide Programme does not startProblem Cause and remedy Pumps are dirty Excessive foam has built up during washing Problems with TwinDos General problems with the washing machine There is water next to Problem Cause and remedy At the end of the pro‐Uid in the capsule Capsule in the fabricAn unsatisfactory wash result Door will not open Procedure for draining the washing machine Blocked drain outletOpening the door Guarantee U.K After sales serviceOptional accessories Guarantee Other countriesInstallation and connection Front viewRear view Installation surface Removing the transit barsInstallation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machinePlease note Building under a continuous work‐ top/ in a kitchen runWasher-dryer stack Inlet hose Water protection systemWaterproof System WPS Electronic unit  and drainage and overflow protection Drain hoseConnection to the water sup‐ ply Extension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Consumption data Selecting a setting SettingsOpening the Settings menu Changing a settingDetergent/amount Buzzer volumeLanguage  Keypad toneDisplay brightness Temperature unitCode Dark displayPre-wash Cottons Machine switch-offMemory Gentle actionMaximum rinse level Reduce tempWater plus level Suds cooling Anti-creaseSpecialist detergents Optional accessoriesDetergent Machine care products Fabric careAdditives Page Page Page United Kingdom WKH 120 WPS