Problem solving guide
The following fault messages appear in the display and the programme stops
Problem | Cause and remedy | |
| Water intake See | The water inlet is blocked or restricted. |
| | Check whether the stopcock is opened properly. |
|
| Check whether the inlet hose is kinked. |
|
| Check whether the water pressure is too low. |
|
| The filter in the water inlet is blocked. |
|
| Clean the filter. |
| Drainage See | The water outlet is blocked or restricted. |
|
| The drain hose has been fixed too high. |
|
| Clean the drain filters and the drain pumps. |
|
| The maximum delivery head is 1 m. |
| Service Water- | The water protection system has reacted. |
| proof | Close the stopcock. |
|
| Call the Service Department. |
Service Fault F | There is a fault. | |
|
| Start the programme again. |
|
| If the fault message appears again, contact the |
|
| Service Department. |
|
|
|
To switch off the fault messages: Switch the washing machine off with the but‐ ton.
65