Miele 09 844 920 Safety lock, To activate the safety lock, To deactivate the safety lock

Page 54

Changing the programme sequence

Safety lock

The safety lock prevents the tempera‐ ture, spin speed or options being al‐ tered during a wash programme.

To activate the safety lock

Press the Start/Stop button.

The following will appear in the display:

Cancel programme	

Scroll up the list with the  or  sen‐ sor to:

Activate safety lock	

Touch the OK sensor.

To deactivate the safety lock

Proceed as for activating the safety lock.

The following will appear in the display:

Deactivate lock	

Touch the OK sensor.

The safety lock is now deactivated.

54

Image 54

Contents Operating instructions for washing machines Contents To cancel delay start and begin the programme straight away Cleaning the containers and hoses Contents Caring for the environment Disposal of the packing mate‐ rialDisposal of your old machine Correct application Safety with children Page Page Correct use Page Accessories Operating the washing machine Control panelOK button Delay start sensor  sensorExamples on how to operate the machine Messages Before using for the first timeSetting the language Removing the protective foil and stickersRemoving the detergent car‐ tridges from the drum Running the first programmeMiele 2 Phase System Liquid detergent/Fabric conditioner TwinDosHow TwinDos works Inserting cartridges/containers Using cartridges Using containers Open the Settings menu Settings for UltraPhase 1 and UltraPhaseSettings for other types of detergent Standard display will then appear Energy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentEstimate Total consumption settingEcoFeedback Actual consumptionPre-treat stains Prepare the laundrySort the laundry General tipsProgramme selection Switch on the washing ma‐ chineSelect a programme Selecting a programme via the programme selectorLoad the washing machine Open the door Close the doorSelect programme settings Select a temperatureDegree of soiling Switch on delay start if re‐ quired Selecting a spin speedSelect options Miele 2 Phase System Add detergentTwinDos Detergent dispenser drawer CapDosing Inserting a capsuleActivating CapDosing Deactivating/changing CapDosing Start the programme the end of a programme Start the programmeAt the end of a programme Final spin speed in the pro‐ gramme SpinningFinal spin speed Rinse and interim spinTo omit the final spin Rinse hold To omit rinse and interim spin and the final spinTo begin delay start Delay startTo select delay start To change delay startCottons Programme chartCottons Cold to 90C Max. load 8.0 kg Minimum iron Cold to 60C Max. load 4.0 kgSilks  Cold to 30C Delicates Cold to 60CWoollens  Cold to 40C Automatic plus Cold to 40C Max .0 kgOuterwear Cold to 40C Max. load 2.5 kg Proofing 40C Max. load 2.5 kgMaintenance wash 75C Empty Sportswear Cold to 60C Max. load 3.0 kgSeparate rinse / Starch Max. load 8.0 kg Shirts Cold to 60C QuickPower wash 60C 40C Max. load 5.0 kgExpress Cold to 40C Dark garments Cold to 60COptions ProgrammeManagerWater plus Pre-ironing Short StainsWash programme chart ProgrammeManager Options Garment care label symbols Programme sequence Main wash Rinses SpinningSpecial features in the pro‐ gramme sequence Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeDoor cannot be opened, if Safety lock To activate the safety lockTo deactivate the safety lock Detergent Miele recommended detergents Detergent Automatic dispensing Manual dispensingColour run and dye removers/dyes Adding fabric conditioner or liquid starch separatelyCleaning the detergent dis‐ penser drawer Cleaning and careCleaning the drum Hygiene info External casing and fascia panelCleaning the siphon tube and the channel Cleaning the detergent dispenser drawer housingCleaning the TwinDos system Cleaning the containers and hosesCleaning the water inlet filter Problem solving guide Programme does not startProblem Cause and remedy Pumps are dirty Excessive foam has built up during washing Problems with TwinDos General problems with the washing machine There is water next to Problem Cause and remedy At the end of the pro‐Uid in the capsule Capsule in the fabricAn unsatisfactory wash result Door will not open Procedure for draining the washing machine Blocked drain outletOpening the door Guarantee U.K After sales serviceOptional accessories Guarantee Other countriesInstallation and connection Front viewRear view Installation surface Removing the transit barsInstallation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineBuilding under a continuous work‐ top/ in a kitchen run Washer-dryer stackPlease note Water protection system Waterproof System WPSInlet hose Electronic unit  and drainage and overflow protection Drain hoseConnection to the water sup‐ ply Extension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Consumption data Selecting a setting SettingsOpening the Settings menu Changing a settingDetergent/amount Buzzer volumeLanguage  Keypad toneDisplay brightness Temperature unitCode Dark displayPre-wash Cottons Machine switch-offMemory Gentle actionReduce temp Water plus levelMaximum rinse level Suds cooling Anti-creaseOptional accessories DetergentSpecialist detergents Fabric care AdditivesMachine care products Page Page Page United Kingdom WKH 120 WPS