5. Add detergent
There are several options for adding de‐ tergent.
TwinDos
Depending on which agents have been added in Compartments 1 and 2:
Miele 2 Phase System
The optimum amount of UltraPhase1 and UltraPhase2 will be dispensed au‐ tomatically according to the colour mix of the load.
Press the Dos sensor.
Depending on the programme selected, the following will appear in the display:
For whites | |
|
|
Use the and sensors to select the dosage mix (for whites or for col‐ oureds) and confirm your selection with the OK sensor.
Base detergent and detergent en‐ hancer will be dispensed in the appro‐ priate dosage mix at the ideal time during the wash cycle.
Liquid detergent/Fabric conditioner
The most suitable agent will appear in the display with a tick () beside it.
If both the agents present in the con‐ tainers are suitable (e.g. detergent for coloureds and fabric conditioner) then both agents will be selected.
Both agents | |
|
|
Confirm the option displayed with the OK button or select another deter‐ gent or fabric conditioner with the and sensors.
Detergent and/or fabric conditioner will now be dispensed in accordance with the wash cycle.
Adding stain remover
There are two options for adding stain remover in addition to using the auto‐ matic dispensing system:
–Use cap dosing.
–Add the stain remover to the compartment.
32